Need post fix help

[Bob W.]

One of my posts outputs an M1 at every depth cut or multi pass for each operation and I'd like to change it to output an M1 only at the end of each operation. Anyone know how to go about this?

[Guest]

Bob,

 

We would really need to know why and how it puts it out there to give you an accurate answer and get the exact desired result

 

I have never seen a post that does what you have going on there, so somewhere along the way it's been modified, but what was done

[Guess_who]

It should be an easy fix, but as Jparis said, we need more information. My guess is that it is in the ptlchg0$ section. Look in you post and show us what it says under that section. Post the entire section up until the next section starts. Look for this area in your post;

 

ptlchg0$ #Call from NCI null tool change (tool number repeats)

 

 

Also you may want to jump over to the post section of this forum and ask for help.

[Bob W.]

It was in the ptlchg0$ section. I removed it so that should make things better. Thanks for the help.