STL Stock rotated 90 degrees

[Chris Rizzo]

Am I missing something? My .stl as stock is rotated 90 degrees.

[JayM]

Stock as defined in the Operation manager -> Stock Setup? Check the "Stock View" setting.

[Chris Rizzo]

That's not in X7, unfortunately.

[Chris Rizzo]

I'm stumped. Off to QC.

[scooke4073]

When you created the STL were you in system TOP?

[Chris Rizzo]

Stock as defined in the Operation manager -> Stock Setup? Check the "Stock View" setting.

 

My bad, yes it is still there. I kept thinking all the stock options were in the new stock setup window, and there was nothing left in the old place. I guess to get your stock correct you have to visit two totally seperate stock setup areas. Brilliant!

[JayM]

I still use the same practice in X7 as in X6.

 

Define stock in Properties -> Stock Setup.

 

This defined stock will be used by default in Simulator. You can use different stock in Simulator by using it's stock setup if you so desire. Best case scenario would be using a stock model to verify against.