waterline not outputing rapid

[Oppiz]

Waterline HSM is not outputing a G0 on the 1st line move of the operation. I'm not sure if is a post issue or something else.

 

 

N105 G20

N106 G90 G80 G40 G1

N107 (T5 - 1/2 FLAT ENDMILL - TOOL DIA. - .5)

N108 G15 H1

N109 G1 G90 X-.4832 Y-1.1949

N110 S6900 M3

N111 G56 H5 Z.1515

N112 Z.1265 F44.

N113 X-.483 Y-1.1946 Z.119

N114 X-.4825 Y-1.1936 Z.1116

N115 X-.4816 Y-1.192 Z.1044

 

using X7 sp2, newest Okuma post from CNC(Colins)

[gcode]

try posting with one of the default posts

that will tell you if its an issue with the post or the toolpath's NCI output

[Cannon]

I´ve seen the same in other High speed toolpaths with mpmaster post. Its not big deal for me so I havent bothered so investigate what is causing this.

[Oppiz]

try posting with one of the default posts

that will tell you if its an issue with the post or the toolpath's NCI output

 

It must be a post issue . I used a one of the default posts and it output the "G0".