"C" axis is posting out 90 degrees off

[Joeyls319]

Evening everyone.

 

I'm having a little bit of an issue. I'm using the Generic Haas VF-TR_Series 5x Mill post in X7 and my "C"axis is posting out 90.0 degrees off (ex. -137.0° should be -47.0°) . Wondering where I fix this. I think its in the machine definition but Im not sure and if it is, I'm unsure how to rotate it accordingly. It's been driving me nuts. Any help would be greatly appriciated.

 

Thanks

 

Joey

[Greg_J]

In your Machine def manager in the machine config window find the axis your wanting to fix.

Right click on it and select properties then try changing the direction from CCW to CW or reverse.

 

Maybe that might help.

[crazy^millman]

Look at your mi9 and mi10 and see if they help you get closer to where you need. That post should be pretty dialed in.

[Joeyls319]

Thank you gentlemen. I tried the setting the properties and playing with the MI values. Got the "C" to come in but now my "B" is the negative instead of positive. I'm going to have to play around with it when I get a little free time.

 

Joey