How To Turn On Program Restart Signal

[48rich350]

I have "activated" the program restart option on a Fanuc 160i-MA controller but need to turn on the program restart signal. I am guessing that it is in the ladder logic and have the list of addresses for the controller however what I don't know how to do is turn stuff off or on. I don't have any experience with this. Any suggestions??

[crazy^millman]

Call your machine dealer they are going to be your best bet. If I knew the ladder logic process I would tell you over a forum and to be honest you would be crazy to use it from me.

[mkd]

ladder logic is somewhat complicated and prolly better to study a full hardcopy to ensure a change in one place doesn't effect another rung (used to be hard to view on small funuc screens). I would leave it to the experts unless you have some significant ladder training.