X7 KI error code 1043 / Out of nowhere now I cant make a Soild ?

[Fred @ Slate Industries]

Hi Guys

I was making Solids from Surface files everyday all day for 3 months straight.

Then today I can't, I get this error:

 

Even the Lowliest 3 surface tube Made in MC off two circles.

Fails !?

I ran an install repair , no change,

Do I need to re register the Parasolid kernel or something?

 

Thanks for any insight here!

Tony

[Pete Rimkus from CNC Software Inc.]

It's a different error message, but maybe the problem described here is the same?

 

http://www.emastercam.com/board/index.php?showtopic=76820

 

It turned out to be Windows 8 specific.

[Fred @ Slate Industries]

I did a Total House cleaning Every folder/ Reg edit /

Then a re install.

X7 Now reads on start up " Blah , Blah Blah, For the First time (That's a Clean install) !

I can now create a solid from surfaces.

The second I Shove my renamed "My Xcam7 & My Xcam7 shared into there locations

I'm back to square 1 No Solids from Surf's.

 

Long story short.

It's the .CFG File only

I had to keep the default and just "Re answer the Questions, Re answer them the exactly as I had them to begin with

Before and During the whole I can't make a solid from a surface .

Back making Solids from Surfs again.

 

Why don't I just Import a Parasolid etc. like the rest of the 21st Century ?!?

Are Eng. comes from Pro E, version.? and the Guy can only give me .IGES or as they say an "I GUESS"

[Colin Gilchrist]

If your engineering department uses Pro-E, have you considered the Pro-E translator?

[Pete Rimkus from CNC Software Inc.]

"...The second I Shove my renamed "My Xcam7 & My Xcam7 shared into there locations

I'm back to square 1 No Solids from Surf's...."

 

Did something get set to a strange value on your Configuration "Tolerances" page?

[Watcher]

ProE is extremely robust in STEP format, in and out. I'd go with that first place.