problems with V9.1SP2

[rsbeadle]

I am having some minor problems with sp2. My box is Dell dimension 4400, 2.0Ghz, 512mb ram, nvidea(?) video card, Windows 2000. My display sometimes freezes while working on a part program. I can manipulate menus but the screen is frozen (no zoom, no repaint). when backplotting an operation while frozen the path is not shown and the cut is not even close to the proper place. Close and restart mastercam and everything is fine. I also have an occasional software crash when I hit file-save (very annoying). If anyone else is having these problems please confirm so that PDG can have a go at fixing them. Thanks

[crazy^millman]

Have you checked you viedo accerlation settings on the advacned setting in the control panel.

 

Crazy Millman

 

 

Also I think there is something mentioned in the tech tips about this also.