Verify stock question

[Greg_J]

Hey Guys,

When I am running verify I rotate the part while it's cutting and the stock that was removed comes back till I'm done rotating then the screen refreshes.

 

Is there away to make it not do that?

 

I want to rotate while it's cutting and see the stock simulation removing material not going to the original stock state.

 

TIA,

 

Greg

[Justin Beebe at Folsom Tool]

Greg_J

 

I believe this first started in MCX7 as a way to speed up verify for larger files.  Some people prefer it that way.  I personally do not like it but I don't think there is any way to change it.  Maybe someone else can shed some light.

[Incogneeto]

Iv'e got 7 and it does exactly the same thing . It is irritating and sometimes it does it between tool changes also.

[CJep]

Hey Guys,

When I am running verify I rotate the part while it's cutting and the stock that was removed comes back till I'm done rotating then the screen refreshes.

 

Is there away to make it not do that?

 

I want to rotate while it's cutting and see the stock simulation removing material not going to the original stock state.

 

TIA,

 

Greg

 

Yes it has to do with the refresh rate, they did that so the graphics wouldn't get overloaded. If you pause the verify reposition the part dynamically then restart the verify it wont do that. Also in McamX8 the verify will allow you to dynamically rotate while running.

[Greg_J]

 

Also in McamX8 the verify will allow you to dynamically rotate while running.

 

That's good news. Hopefully there will be a release soon.

 

I thought I read on one thread that there was a file you can edit to adjust settings for verify. I remember there was an issue with the stock colours not sticking.

[cncworker]

Hey CJep, i read your post on X8 will have dynamic rotate in verify.  Where is it?  I like the right click method as was in X6.  I thought upgrade to X8 from X7 would have fixed that. 

[CJep]

Hey CJep, i read your post on X8 will have dynamic rotate in verify.  Where is it?  I like the right click method as was in X6.  I thought upgrade to X8 from X7 would have fixed that. 

 

The dynamic rotation I was referring to is using the Space Pilot and Mouse,...