5 axis toolpath MasterCam X6 & X8 and Catia 5 axis. Need HELP

[mp5navy16]

Confirmed Pirate

Edited April 1, 2015 by JParis
Removed items, using cracked version, verified by CNC Software

[Guest]

Perhaps some basic training is in order because it sounds as though you have none at all....

 

We try to help on the forum but we cannot replace training.....I would suggest contacting your reseller directly and setting something up to explain and teach you.

 

JM2C

[mp5navy16]

Perhaps some basic training is in order because it sounds as though you have none at all....

 

We try to help on the forum but we cannot replace training.....I would suggest contacting your reseller directly and setting something up to explain and teach you.

 

JM2C

Could you make a swarf 5 axis tool path with step surface in this part for me?

[Guest]

You really should contact your reseller

 

You DO have a reseller in Vietnam, right?

 

One of these 2 I assume

 

The Mastercam Reseller(s) Near You

 

Reseller: I.M.E. Trading SDN. BHD.

Reseller URL: http://www.cadcam.com.my/

Contact: Teoh Tuan Ka

Phone: 011-603/7783-3350

Email: [email protected]    

 

Reseller: Techtown Pte. Ltd.

Reseller URL: http://www.techtown.com.sg/

Contact: Chiang Chin Hock

Phone: 65-6636 8215

Email: [email protected]    
 

[MIL-TFP-41]

Could you make a swarf 5 axis tool path with step surface in this part for me?

 

In what world would you ever actually use a cutting strategy like that? Looks like it would be deflection/gouge city

[TheePres]

Cutting strategy seems fine to me. Why don't you just save yourself the grief and run your toolpaths in Catia?

[MIL-TFP-41]

...

 

 

 

[mp5navy16]

Cutting strategy seems fine to me. Why don't you just save yourself the grief and run your toolpaths in Catia?

I have to using mastercam 5 axis. And I try to make a best tool path.

You can see my program below. I think the program is ok, and the question is: How can I make a better tool path and Is there any way to program faster?

I take time to create surface and resolve it.

[Guest]

That the only cracked version you could get?

 

That why you can't ask your reseller?  

[mp5navy16]

That the only cracked version you could get?

 

That why you can't ask your reseller?  

I am working as a part time-reseller in VietNam, and I can not ask a technical from Malaysia or Singapore go to VietNam to show me more about 5 axis. The price is expensive.

 

Mastercam have some issue that I can not underestand.

 

X6 version, swarf 5 axis have lead in and lead out each depth of cut.

x8 version, swarf 5 axis do not have lead in and lead out each depth of cut.

 

I try both swarf 5 axis and swarf milling and I see some difference. In that case swarf 5 axis work good, in some case swarf milling work good and I do not know why because the shape of part is similar.

 

I think someone in this forum have the same problem.

[Guest]

I am working as a part time-reseller in VietNam, and I can not ask a technical from Malaysia or Singapore go to VietNam to show me more about 5 axis. The price is expensive.

 

Mastercam have some issue that I can not underestand.

 

X6 version, swarf 5 axis have lead in and lead out each depth of cut.

x8 version, swarf 5 axis do not have lead in and lead out each depth of cut.

 

I try both swarf 5 axis and swarf milling and I see some difference. In that case swarf 5 axis work good, in some case swarf milling work good and I do not know why because the shape of part is similar.

 

I think someone in this forum have the same problem.

 

 

If you're working as a legitimate Mastercam Reseller, go straight to CNC Software.....I worked for a reseller for almost 7 years......

 

If you're legit, go right to the source

[Thee Awbade™]

That doesn't look like a 5 axis cut though. Why not use a 3 axis toolpath to give you the control you need. 

[mp5navy16]

That doesn't look like a 5 axis cut though. Why not use a 3 axis toolpath to give you the control you need. 

I upload my files on dropbox. You can see it.

[Guest]

Confirmed pirate sighting...thread closed

 

I would say if you are only trying to learn, download the HLE version, which is freely available