X8 LATHE OLD STYLE BACKPLOT

[gary adams]

I have 2 computers one laptop and one tower, each has X8 loaded, the laptop runs the old style backplot the tower does not.

Also in configuration on the laptop after anylyse in the list there is backplot on the tower it is not there?

The old style backplot gives display of the rapid to home of the tool, the new one does not seem to. Can anyone help?

kind regards

Gary

[civiceg]

Start menu --> All programs --> Mastercam X8/9 --> Utilities --> Advanced config --> Backplot --> enable classic backplot

[gcode]

On the Backplot page in System/Config there is a switch

"show lathe home move"

it affects both versions of backplot, but you need to besure

you have "show rapid moves" turned on

[gary adams]

Thanks guys I have classic on both now. cannot get display of home moves on the new backplot though.

kind regards

Gary