coment after tool change

[mirek1017]

Hello every one!!!

 

I have question .I would like to get comment after tool change ,there is something  what I can change in mastercam or I have to play inside postprocesor ????

 

 

 

now I have this

(ROUGH CONTOUR)N8 D1 (1 INCH FLAT INSERT  ENDMILL)G00 G90 G54 X95.417 Y33.6501S900 M03G54 W0.Z4.Z.2G01 Z-.2583 F50.G41 Y33.3501 F10.X104.292

I would like to have comment after tool change

N8 D1 (1 INCH FLAT INSERT  ENDMILL)(ROUGH CONTOUR)G00 G90 G54 X95.417 Y33.6501S900 M03G54 W0.Z4.Z.2G01 Z-.2583 F50.G41 Y33.3501 F10.X104.292

Thanks for any help

[crazy^millman]

Inside the post and look for comment$ variable.

 

# in front of it and copy to below the t$ line in the post and see what your results are.

 

Always make a backup copy of your post before attempting any post modification.

[mirek1017]

thanks  Ron for your reply

 

let me try

[mirek1017]

when I am  copy to below then I am delete tool change and my first positioning line