Offset issues

[Nelsey]

We are having some issue with our offset. When we are milling out multipule holes of diffrent sizes we have to constantly put in the pipe offset size. Before an up date in Aug. we would only have to put it in for first tool and it would be set for all other tools. Does anyone now haw we can fix this?

[jlw™]

That's a bit vague, shooting from the hip I'd say set it in the plane manager.

[Guess_who]

We are having some issue with our offset. When we are milling out multipule holes of diffrent sizes we have to constantly put in the pipe offset size. Before an up date in Aug. we would only have to put it in for first tool and it would be set for all other tools. Does anyone now haw we can fix this?

 

I think maybe you're talking about sequentially numbering?

[Guest]

We are having some issue with our offset. When we are milling out multipule holes of diffrent sizes we have to constantly put in the pipe offset size. Before an up date in Aug. we would only have to put it in for first tool and it would be set for all other tools. Does anyone now haw we can fix this?

I really think you need to explain this better......

 

This, to me, makes zero sense

[Fred @ Slate Industries]

Im guessing he could pick the center of different sized holes and the dia field

Would be greyed out and his one tool would nail all the different dia.

 

This can still be done in 2017 / X9

But I have start a Fresh toolpath to do it. Can't edit an old one to new geo. Like before it seems.

 

(I am literally sitting on a picnic table

In Fish creek Wis. The leaves have almost peaked in color.)

[jlw™]

You have to click point geo to input dia in manually. Arc geo or arc on a solid all force the arc dia.

[Fred @ Slate Industries]

Ahh I knew it had something to do with

How I picked it , I had center of arc locked on vs. Zeroing on the arc center with the cursor.

 

( 280 miles south of that bench currently)

Lol