840D feed rate output

[mayday]

I would like to replace the "F" feed out put with a variable call. I'm not sure how or where to do this in the post.

This allows me to adjust the feed while the machine is running

 

sample

 

G0 X.45114 Y-2.0384 Z1.55066 D1 M107

G1 X.36027 Y-1.34402 C4=DC(343.89797) G94F=R97

G1 X.36018 Y-1.3436 Z1.55049 C4=DC(343.89796) G94F=R99

G1 X.35654 Y-1.32571 Z1.54438 C4=DC(343.89797)

G1 X.35252 Y-1.30736 Z1.54018

G1 X.34807 Y-1.28878 Z1.53792

G1 X.34318 Y-1.27016 Z1.53761

G1 X.33781 Y-1.25175 Z1.53922

[crazy^millman]

That is a Colin Question. I have a good idea how to do it, but it would be a little tricky. You need to replace everywhere in the post where feed is called with a new variable. The variable needs to be defined juts like you want. I would go so far as adding a switch process where you can flip a switch in an operation and get either or for your output when you want it.