haas mill setting 191

[cherokeechief79]

default smoothing.

I know you loose accuracy on corners with this set on rough but everything runs so much faster and smoother.

im curious if this is set to rough and your finish tool has a slow federate ,does it actually affect anything?

it seems to also work with setting 85 "max corner round"

if the federate is slow doesn't it just go to the programmed path anyway without rounding anything?

[Matthew Hajicek - Singularity]

Why not specify it when you turn it on?

Roughing: "G187 P1 E.010"

Semifinish: "G187 P2 E.005"

Finishing: "G187 P3 E.002"

I got my post setup to take these settings from Misc Values.

[ALU-PHJ]

On 13/4/2017 at 11:44 PM, Matthew Hajicek™ - Conventus said:

Why not specify it when you turn it on?

Roughing: "G187 P1 E.010"

Semifinish: "G187 P2 E.005"

Finishing: "G187 P3 E.002"

I got my post setup to take these settings from Misc Values.

Hey Great

Can you post me some info from your post, so we can implant the in our postprocessor, please?

[crazy^millman]

5 hours ago, [email protected] said:

Hey Great

Can you post me some info from your post, so we can implant the in our postprocessor, please?

Look at MPmaster all the logic needed it in there.