Need help with a mastercam post. T.I.A.

[ranchero]

I have been playing with my post and can not get it to separate the Z move from the x and y in its initial position move when using multiple tools or a forced tool change. The first tool works great but if using a forced tool change or multiple tools bam the x,y and z are back in the same line after the G94. Below is the example this situation happens using 2 tools.

Attached is my post any help or suggestions would be appreciated. Thanks.

%
O0000(T)
( T1 |  1/4 FLAT ENDMILL | H1 | D1 | WEAR COMP | TOOL DIA. - .25 )
( T2 |  1/4 CHAMFER MILL | H2 | D2 | WEAR COMP | TOOL DIA. - .25 | XY STOCK TO LEAVE - -.01 | Z STOCK TO LEAVE - 0. )
N1 G90 G54 G64 G50 G17 G40 G80 G49
N2 G20
N3 G54
N4 M8
N5 M998
N6 T1 G43 H1 M6
(  1/4 FLAT ENDMILL | TOOL - 1 | DIA. OFF. - 1 | LEN. - 1 | TOOL DIA. - .25 )
N7 S3500 M3
N8 G0 G94
N9 X-.005 Y.135 -----------------------------------------------------------------------------------------------------------------------------   (Here it is fine)
N10 Z.1
N11 G1 Z-.1 F30.
N12 G41 D1 Y.13
N13 G3 X0. Y.125 R.005
N14 G1 X1.9297
N15 G2 X2.0547 Y0. R.125
N16 G1 Y-1.1602
N17 G2 X1.9297 Y-1.2852 R.125
N18 G1 X0.
N19 G2 X-.125 Y-1.1602 R.125
N20 G1 Y0.
N21 G2 X0. Y.125 R.125
N22 G3 X.005 Y.13 R.005
N23 G1 G40 Y.135
N24 G0 Z.1
N25 M9
N26 M5
N27 M8
M01
N28 M998
N29 T2 G43 H2 M6
(  1/4 CHAMFER MILL | TOOL - 2 | DIA. OFF. - 2 | LEN. - 2 | TOOL DIA. - .25 )
N30 S3500 M3
N31 G0 G90
N32 X-.005 Y.125 Z.1 -----------------------------------------------------------------------------------------------------------------------------   (Here it is back to placing them in the same line)
N33 G1 Z-.125 F30.
N34 G41 D2 Y.12
N35 G3 X0. Y.115 R.005
N36 G1 X1.9297
N37 G2 X2.0447 Y0. R.115
N38 G1 Y-1.1602
N39 G2 X1.9297 Y-1.2752 R.115
N40 G1 X0.
N41 G2 X-.115 Y-1.1602 R.115
N42 G1 Y0.
N43 G2 X0. Y.115 R.115
N44 G3 X.005 Y.12 R.005
N45 G1 G40 Y.125
N46 G0 Z.1
N47 M9
N48 M5
N49 M998
N50 M30
%

 

MACH 3 AXIS MILL.rar

[Guest]

You can find the setting for this in your control def

 

[PcRobotic]

Thank you, JParis.  I have the same problem too and now you just save my work.

 

S.Luong