Post processor help

[Pbt79823]

Can anyone tell me how to make mastercam x5 post a canned cycle for each hole individually instead of giving the canned cycle line then just listing locations?

[huskermcdoogle]

Why would you want to do that?

[Pbt79823]

fadal machine wont rapid to the next hole that way. seems you have to cancel canned cycle after each hole then call canned cycle at next hole otherwise it feeds to the next hole instead of rapid

[crazy^millman]

Copy the drill section to the 2nd call section. 

[Pbt79823]

Can you be more specific?  I'm not certain where to copy and paste 

[huskermcdoogle]

1 hour ago, C^Millman said:

Copy the drill section to the 2nd call section. 

+1

This shouldn't be hard. You would do that in the _2$ (additional points) canned drill code I think.

But more over, I don't know, but I wouldn't think fadal's would operate that way by defualt. Can you post up some sample drilling code from tool change through the first few points.  Maybe there is something simple missing in the program?  Maybe a parameter worth looking into?

 

 

[Guest]

X5, careful boyz

[Pbt79823]

Careful?

[Guest]

2 minutes ago, Pbt79823 said:

Careful?

Yes, we've found X5 to be the single most pirated version....as such, I suggest X5 users go through their reseller or provide a valid SIM# to the webmaster...

It's an old version and HIGHLY pirated.

[Pbt79823]

I will ask my employer for the sim

[Guest]

Please don't take this wrong..a legit user will find some of the best technical knowledge they can find here/....

That version is just so, so suspect, that asking is almost something that needs to be done.

Yes, there still are legit X5 users.....

You do not have to publicly post your SIM# and I would advise against it....shoot it to Daniel Gingras on this forum, he is the webmaster and can verify it.

Edited August 1, 2017 by Guest

[crazy^millman]

1 hour ago, JParis said:

X5, careful boyz

I was putting out the bait to see what kind of bite we would get. 

[: Chip :]

I got my X5 from this guy

 

:CHIP: