Getting a new mill(Cincinnati)

[Oppiz]

We recently ordered a Cincinnati Arrow2 VMC750 with a fanuc18I control.

My questions is....for a post should I use Mc's fanuc post and tweak it or call my dealer or maybe one of you kind, generous, intelligent (kiss kiss)people already have a post and are willing to share.

[Guest]

Try the Mpmaster from this site.

[Phil Orenstein]

Your lucky to get a Cincinatti with a fanuc control. This no doubt is a used machine but newer than the old Sabre 750's which I have with the Acramatic 850SX controls which I've made comments about previously Don't get me started. My guess is to use the std MPfan and tweak it.

 

Phil

[Oppiz]

quote:

---

This no doubt is a used machine

---

Nope, its brand new. They gave me a choice Siemens A2100 or a GE Fanuc 18i-M.

 

see for yourself;

 

 

http://www.cincinnati-machine.com/products/vert_set.htm

[Guest CNC Apps Guy 1]

Get the Fanuc if possible. What makes Cinci's crap in the Semen(sic) control. The iron is decent. BUt there is a good post for the cinci here. I use it for our Cinci's. Post - run! (for your life) j/k

[Lathe-Mill]

quote:

---

Nope, its brand new. They gave me a choice Siemens A2100 or a GE Fanuc 18i-M.

---

GOOD CHOICE!!.

fanuc best control out there.

[PE @ IHS]

I suffered through 2 Acramatic 2100 controls this past couple of weeks. Fanuc is a far better choice.