one shot
-
Posts
60 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by one shot
-
You set a spindle speed to release the orientation at the end of a prog???
-
This is how I got around that problem. You can call the next tool as "empty" in an okuma code in my post is as follows: ptoolout # Output tool information for current tool in spindle if t_flg > t_flg2, [*n, "CALL OT", "VC1=", *bltool, "VC2=", *speed, "VC3=", *next_bltool, e else,[*n, "CALL OT", "VC1=", *bltool, "VC2=", *speed, "VC3=EMPTY", e ]
-
One downfall. Must have one empty pod in the magazine, of error occurs
-
It did what I wanted. I will now include this at the end of all my progs. Thanks
-
Yes, and I leave it in loaded in memory and every prog uses it. All code generated via MC also use it. I had the post altered to make the sub call
-
I'm trying variable set now. Can't wait for magazine to find tool. Have called Okuma rep in past with no results. There must ba a way. M63 resulted in error.
-
I use a sub to save code lines and do all my error checking ( if vatool...)also it set my rpm and call my next tool. It saves me about 7 lines of code per tool. I'll send it to ya if ya want.
-
Yes it has a return cycle start, but you can't activate via code. I use a sub to do all my tool chg and want to cancel next tool call at end of prog to leave mach open for mdi input on next setup.
-
I've been trying to find a way around that for years. It's no big problem. Just looking to see if anyone has found a way around it. Been hitting that reset button for over 20 years now and am tired of it. Thanks for the input.
-
Hello everyone. Does anyone know how to cancel the next tool call on an okuma w/5000 control? Right now I must go to manual and hit the reset button to clear the next tool called up. I was wondering if anyone has found a way to do this with code.