Never had a problem till upgraded from Solidworks 2014 to 2015 using Mastercam X4 get error message Cannot find Parasolid data in Solidworks file.

I have a .CSV file saved with my different level numbers with descriptions, but I have to load it every time, is it possible for my .CSV file to load when Mastecam X4 is started? Thanks for your help in advance. JimP from bonnie Scotland

Agree with Bubbles 'Not to be rude but I would agree 100% with Thad.'

Thanks but the company that made this one seems to be out of business.

Hello all I am looking for a Right Angle Head for Hass VMC, have seen many on the web but looking for a more substantial model also has to run at 4000rpm. We cut quartz glass slotted rods with Ø200 x 2mm diamond tools so low vibration is a must, any help very much appreciated. We have a Right angle head on our Fadal looking for similar see attached picture. Regards JimP from bonnie Scotland

Hello All Problem with an old mill we use for making fixtures the machine crashed and it lost the parameters does anyone have a copy of them. Control is Heidenhain LE407A Machine AVIA FN50. Thanks for your help Regards JimP

Thanks sorted. Have a nice day Jim

Thanks sorted. Have a nice day Jim

Sorry should have mentioned using X4

Good morning Just last week when opening new drawing have extra graphics like wire frame but no screen statistics on my screen, see Jpeg. Thanks in advance for any help. Regards JimP Extra graphics.pdf

Thanks I never noticed it was saving the new library to mastercam root directory it worked a treat. Thanks for your help hope you have a enjoyable weekend. Jim

I have some old lathe tools in my old V9 library I need and would prefere not to have to redraw them all, is it possible to convert this library to X5?

Yes use solidworks now for all my modelling but still agree Mastercam is the best for CAM. JimP

Using Multi-DNC works well we are feeding 8 machines.