Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
I have a .CSV file saved with my different level numbers with descriptions, but I have to load it every time, is it possible for my
.CSV file to load when Mastecam X4 is started?
Thanks for your help in advance.
JimP from bonnie Scotland
Hello all
I am looking for a Right Angle Head for Hass VMC, have seen many on the web but looking for a more substantial model also has to run at 4000rpm.
We cut quartz glass slotted rods with Ø200 x 2mm diamond tools so low vibration is a must, any help very much appreciated.
We have a Right angle head on our Fadal looking for similar see attached picture.
Regards
JimP from bonnie Scotland
Hello All
Problem with an old mill we use for making fixtures the machine crashed
and it lost the parameters does anyone have a copy of them.
Control is Heidenhain LE407A
Machine AVIA FN50.
Thanks for your help
Regards JimP
Good morning
Just last week when opening new drawing have extra graphics like wire frame but no
screen statistics on my screen, see Jpeg.
Thanks in advance for any help.
Regards JimP
Extra graphics.pdf
Thanks I never noticed it was saving the new library to mastercam root directory it worked a treat.
Thanks for your help hope you have a enjoyable weekend.
Jim
I have some old lathe tools in my old V9 library I need and would prefere not to
have to redraw them all, is it possible to convert this library to X5?
Mikron VCE 750 Haas controller
When a program has been proved operator changes date at top of program
And sends back to DNC computer.
Problem date on CNC machine is 1996 how do you change date at CNC controller?
Thanks in advance
JimP
Hello We have lost the parrameter settings on our Mikron Haas VCE750 have floppy
Haas Automation CNC Data Disc
but not sure how to load it any idea's
Thanks in advance
JimP Scotland
Hurco BMC 25 Parameters Ultimax BN9-007-061
Hello Guys we have an old Hurco in the shop that we use for old programs 1992 model. Problem is the batteries in the memory board are not recharging, therefore we need to keep the machine powered-up.
Next week we are getting a new electrical supply so will need to switch machine off.
Is there any way of downloading the Parameters to the computer where we keep the machine programs?
Thanks in advance.
Jim
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.