35K chipper
-
Posts
204 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by 35K chipper
-
-
i think California gig grinders is down there.
35k
-
i was the one to win. not you chippy!
35k
-
I will chime in!
ding ding!
send info plz.
35k
-
Me thinks Greg is an Okuma guy. Me too! You get what you pay for.
35k
-
1
-
-
done!!!!!!!
35k
-
I use this product on all my 40 taper tool holders.
It's a dry ptfe (teflon) mold release in a spray can. miller-stephenson MS-122AD.
been using it about 8 years. we apply it once a month. no more sticking!
35k
-
sounds like Hardmill went to a catholic school. ruler and knuckles. nunology!
35k
-
1
-
-
-
+100 on SCT
35k
-
once a month just to see if it still works!
35k
-
David,
very well in cast aluminum even when there is sand in the casting. that's why i started using them. now i use them in every thing that's non ferrous, alum, plastic, mag, copper, zinc, carbon, makor, graphite, and silver. they last 40 to 50 times longer than regular micro grain cadbide. do the math these are way cheaper in the long run.
35k
-
page 40 09/2009 cat cvd diamond endmills.
you will be an old man like me when you wear those out in aluminum. you need lots of rpm like 35k. I use them every day.
35k
-
ok here is what i use for a 0.0150 carbide circuit board drill in 6061 t6 35000rpm at 8.3 imp 0.0040 peck that's only 137.43 sfm at 0.0002 per rev. i will drill 2000 holes and toss the drill. hope this helps.
35k
-
Superman,
this is how i control my okuma's U100M control.
phinca # Super Hi-NC Control Selector
if mi8$ = 1, "G131J0I0", e$
if mi8$ = 2, "G131J1I0", e$
if mi8$ = 3, "G131J2I0", e$
if mi8$ = 4, "G131J0I1", e$
if mi8$ = 5, "G131J1I1", e$
if mi8$ = 6, "G131J2I1", e$
if mi8$ = 7, "G131J0I2", e$
if mi8$ = 8, "G131J1I2", e$
if mi8$ = 9, "G131J2I2", e$
if mi8$ = 10, "G131J0I3", e$
if mi8$ = 11, "G131J1I3", e$
if mi8$ = 12, "G131J2I3", e$
if mi8$ = 13, "G131J0I0K1", e$
if mi8$ = 14, "G131J1I0K1", e$
if mi8$ = 15, "G131J2I0K1", e$
if mi8$ = 16, "G131J0I1K1", e$
if mi8$ = 17, "G131J1I1K1", e$
if mi8$ = 18, "G131J2I1K1", e$
if mi8$ = 19, "G131J0I2K1", e$
if mi8$ = 20, "G131J1I2K1", e$
if mi8$ = 21, "G131J2I2K1", e$
if mi8$ = 22, "G131J0I3K1", e$
if mi8$ = 23, "G131J1I3K1", e$
if mi8$ = 24, "G131J2I3K1", e$
i have all the options predefined in the control
then i select the fidelity in need in the operation. at the end of the op it cancels with a G130.
35k
[big Grin] -
SLJ,
this is how i control my okuma's U100M control.
phinca # Super Hi-NC Control Selector
if mi8$ = 1, "G131J0I0", e$
if mi8$ = 2, "G131J1I0", e$
if mi8$ = 3, "G131J2I0", e$
if mi8$ = 4, "G131J0I1", e$
if mi8$ = 5, "G131J1I1", e$
if mi8$ = 6, "G131J2I1", e$
if mi8$ = 7, "G131J0I2", e$
if mi8$ = 8, "G131J1I2", e$
if mi8$ = 9, "G131J2I2", e$
if mi8$ = 10, "G131J0I3", e$
if mi8$ = 11, "G131J1I3", e$
if mi8$ = 12, "G131J2I3", e$
if mi8$ = 13, "G131J0I0K1", e$
if mi8$ = 14, "G131J1I0K1", e$
if mi8$ = 15, "G131J2I0K1", e$
if mi8$ = 16, "G131J0I1K1", e$
if mi8$ = 17, "G131J1I1K1", e$
if mi8$ = 18, "G131J2I1K1", e$
if mi8$ = 19, "G131J0I2K1", e$
if mi8$ = 20, "G131J1I2K1", e$
if mi8$ = 21, "G131J2I2K1", e$
if mi8$ = 22, "G131J0I3K1", e$
if mi8$ = 23, "G131J1I3K1", e$
if mi8$ = 24, "G131J2I3K1", e$
i have all the options predefined in the control
then i select the fidelity in need in the operation. at the end of the op it cancels with a G130.
35k
-
I run destiny 3flt diamond back's at 1400ipm 30000 rpm .5 doc 30% radial. they can really rip. Dyanamic Mill is the way to go.
35k
-
hemp mousepads! so if your having a bad day you can smoke it.
35k
-
found 1 more. maybe colin knows something about these people.
http://www.metronsys.com/3d-laser-scanner.html
35k
-
i'd like 4 of those 1 terabyte pci ssd in a raid config striped and mirrored.
35k
-
Hardmill and Ron,
here are a few links i found on high precision laser scanners. $$$ ???
http://www.nvision3d.com/products.html
http://gks.com/products/scanners_and_softw...ners/dm-series/
http://www.qubic.com.au/minolta_range7.htm
http://www.qubic.com.au/products.htm
now it's time for cost,and ROI
35k
-
Hardmill,
let us know how well it works? i need one that has 0.0001 in or 0.001mm to profile IC's up to 50mm x 50mm x 3mm. 0.005 in won't cut it for us. if you know of one with this resolution let me know.
thanks
35k
-
i am going to call them after the long weekend. they are right around the corner from here.
35k
-
-
CNC GRINDING
in Industrial Forum
Posted
here is the web page for California jig grinders.
www.caljig.com/capabilities/
35k