Ashan
-
Posts
323 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Ashan
-
John Please explain me little how to bring it as chook thanks
-
Create Bolt circle is not in toolbar customizing list . Is it possible to bring to toolbar?
-
may be some setting wrong
-
Thanks John
-
I did not see any small errors fixed which we informed to QC of mastercam, in MR1
-
How can I get X+ in X2 MR1 Do I have to install again
-
thanks
-
Pleae where can I get command to projected curve to a surface Thanks
-
thanks
-
In version 9 Create curve projected to a surface What is equal in X2 Please someone show me how to project a curve to surface Thanks
-
still cannot do math in the bolt circle hole diameter too I am disapointed. also lathe geometry of groovetool still same
-
yes Also in toshiba controls says sectors I calculate more less 2sectors = 1kb thanks
-
If someone knows the file size between Please input some information’s about Kb and Characters Kb and Sectors Machine to machine have different units
-
I never use G73
-
# -------------------------------------------------------------------------- # Machine Specific Settings # -------------------------------------------------------------------------- #Machine axis switches, initial y_axis_mch : no$ #Machine has Y axis, 0=no, 1=yes old_new_sw : 1 #Switch old (6T), new (0T+) cycle formats, 0=old, 1=new wcs_origin : 0 #Always use the WCS origin for coordinates
-
Hi Dave should be old_new_sw : 1
-
Is that window Xp 64 th edition ?
-
i use editor because one tool job done by 5 tools editing is faster for me I have to make 21658 holes on 221 colums on a cylinder
-
I forget to say many times replace
-
2 or 3 year ago I had editor Edwords in dos version. Some how I lost it now This editor micro I used replace one line by many lines (example 5 lines) NC codes Or replace many lines to one line Now we use Cimco or Mastercam also I use Winedit Is any possible to do above options on these editors or any other editors? If we can do, please explain how to do Thanks
-
Matsuura 450H- Download all Programs
Ashan replied to Bill Sutton@Accurate Machine's topic in Industrial Forum
just press out put all or each will help -
thanks
-
In X2 1) I tried to make lines and arc from spline I used Edit simplyfy But I could not find any lines or arcs Is there any easy method to make them? 2) My computer is window 64 bit edition I tried to alternatively make curve I use create solid 2d profile Its take more than one hour to make I do not understand why this take too much time Please give some help use above to functions
-
thanks
-
In X2 When I copy all tools from part tools and paste in new tool library All tool numbers changed to as 1,2,3, 4... But offset numbers stays as part tool file Please some tell me how can eliminate this problem