HN
-
Posts
34 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by HN
-
I am using X5 and X6. Does anyone know the 5 Axis Surface Swarfing reconizes the tapered tool (conical 10 degree taper ball). I did try it but it does seem right at all. It looks gouging my part badly.
-
Does any one how to re-register work offsets and tool offsets in the NC file like G10 in Fanuc for DMG Machine with Siemens 810D control? Thank you so much.
-
Thanks, Gcode!
-
Does anyone know that the stock recognition on X4 Milling is available yet? Thanks.
-
Please check your mail.
-
This is an Okuma MU table-table machine. My X2 is level 3 with all 5 axis options. I have 1.5 experience with 5 axis. This part is a aluminum cast with .020 stock. This has a main plate and splitter very steep angle. Please show me how to upload the bmp on this forum to share with you. Thank you so much for helping.
-
I'm using X2. Trying program a impeller with splitter. Does any one have technique to cut this? Thank for helping.
-
Hello! X2-MR2, how could anyone do slant milling(not conventional planes). Only thing I can see now is Lathe - Face contour or Cross contour, what about pocket or surfaces machining? How MasterCam keep tracking with the coordination shift if I decide change my Toolplane to the odd angle?
-
Hey, Millman! Check your e-mail. Hope this helps you.
-
Hello! I have whole manual for you, but I don't know how to send it to you.
-
I'm starting programming 5 Axis Table on Table. There is confusion between Inverse Time Feed and RTCP. Please tell me which way is the better way to post out. Different people are giving me different inputs. It supposes that my post is capable of both ways of posting. What is pros and cons of each method? Thank you so much.
-
Hello, Gentlemen! I am using X2Mr2.I did create a Macro and it went fine but when I tried to replay it, it gave me all kinds of weird things on the screen and it didn't appear the same way that I recorded. You guys know what happen?
-
Thank you very much, guys!
-
Dear, Gentlemen! I'm using X2 SP1 MR1. I'm trying programming the Turbine Propeller and using Advance MultiAxis - Morph between 2 curves for roughing. The toolpaths didn't seem very clean. Please tell me what kind of toolpaths that I should use for roughing this Turbine Propeller. My part is about 5.00 dia. I very much appreciate your help.
-
Hello, Guys! I saw a Safety Zone in the Machine Group/Properties/Safety Zone. What does the Safety Zone do? Appreciate your help.
-
Guys! Thanks for explaining it to me. Have a nice day.
-
I'm using X2 Mr1. How does it make a difference when I change the Tool Vector Length in 5 Axis programmin? I didn't see any difference in .nc file when I change it between .1 to 3.
-
Hello! Your MasterCam is kind of out of date a little bit. MasterCam has X2 Mr1 now. I don't have that problem
-
Hello, Justin! I did saw the asterisk next to my custom Toolbar states but it still re-arranged my working environment when I launched new X2 Thank for your help.
-
Hi! I did like you told but it didn't work. I don't have this kind of problem with X2 SP1 but since I upgrade to X2 MR1 then I have this problem. All the "Custom Toolbar 1 Icons" are there but they re-arrange everywhere. Thanks
-
Hello! I customize my working toolbars. But whenever I launh new X2 all my customzized toolbars are there but the location of toolbars weren't the same way that I shut down the X2 from the last time. Please show me how to make the location of my customzied toolbars fixed.
-
Hello, Gentlemen! Does anyone know any websites that I can download the cool model(such as woman's face, flowers, animals' face) Thanks
-
Hello! Does anyone know how to turn off the help composer? Some reasons the MC9 help composer keeps poping up on my screen whenever I try to use MasterCam. I have MasterCam 9.2. Thanks, guys.
-
Hello, David! I tried and It didn't work. Some reasons it didn't post out the B axis. And I don't see any field to input the B axis angle either.
-
Hello, David! Thank for your help. I will try on Monday and I will let you know.