Is there any downloadable (nice word) tool libraries out there ? Kind of an ad on to what comes with the seat.

Here's what worked for me....The post is the new MPFAN that came with it.You need to change the arc type to "absolute" in the control definitions and sometimes (not always) you need to change the post in the general output settings to a 1 (absolute) as well. It worked that way for the haas....but not the hardinge. THANKS FOR ALL THE INPUT GUYS !

That's what i was leaning towards Jim....I know the post can overide the Control Def. I'll keep you posted....no pun inten....I guess there really was. thanks

Will do....Thank you !

I've changed it from absolute to inc to unsigned.....do you know what it's suppose to be ?

Does anyone know which change you have to make so i don't put out radii's but I's and J's instead ? this is driving me nuts !!! Haas Mill X3 I've got the post set right but it doesn't matter what setting i change or so it seems.......

Can't you create a curve (geometry on the slot) and run slot mill on it. Mill 1 function.

I Have dealt with my dealer many times...I just like to read and use this forum.It's supprising what you can learn from reading others.Sometimes just a quick little post can take care of a little pain in the butt problem rather quickly.I have tried most of these quick fixes myself but it might be the right combination of these that help. Thanks for all the input guys.

I could pose this question or all the others to my dealer but he probably wouldn't enjoy it.Besides...isn't that what a forum is for ???

I guess we could have updated to an outdated version....thank you for your help.

HOW DO I GET MCX3 TO NOT PUT G28U0.W0. G50X20.Z20.0 AT THE START OF THE PROGRAM ??? MC9 STARTED WITH GOT202 OR WHATEVER TOOL YOU WERE USING. IT CAN'T HAVE A G54 EITHER BUT I GOT RID OF THAT. HELP !!!

MCX3 from Mc9 - How do i get rid of the G28U.0W.0G G50X20.Z20 at the beginning of the file ? It normally starts out GOT2O2 and then G97.... or whatever tool your starting with ????? I finally figured out how to get rid of the G54 and then i get this.It does't like the G54 command either. The lathe it a Hardinge Conquest-42

.....nothing seems to be working crap oh well thanks guys. If you think of something else please email it to [email protected]

I do realize that a solid can only be one color but all the surfaces i bring in are 1 color as well.....that's why I'm hoping there's a setting or something to change that.otherwise i have to open both programs solidworks to see what the hole is and mastercam to run off of.

I'm just going file/get and that's how it comes in....is there another way to bring it in as a group ???