Rick Henrickson 65
-
Posts
1,501 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Rick Henrickson 65
-
james from the front view of the tombstone I can not get it to rotate correctly I just want from B0 to B270
-
I am not positive was just thinking
-
14 tpi would give you a 4 start thread no worky 88matt I think getting the multi pitch threadmills are much faster than single pointing
-
yes that is what i was looking for now I see what tool path to use I just need to rotate around y and should be good Thanks.
-
-20 OP#2 step 57
-
ok if you look at the solid in the front view as the leg comes down and rotates to the 270 side I fould like to stitch all the way around the corner from B0 to B270
-
ok there is a zipped file also!
-
No I didn't the file is 11.4mb should I?
-
It is pretty big took about 4 minutes to put on the ftp site
-
-
I am putting it on the ftp site under mcx HN3938-19-20.mcx
-
I have a part that comes down in the y axis then makes a 90 degree bend to the 270 side like a twist
-
just wondering how to use the b axis to stitch i have never had a fuul 4th always indexed stitched and so on. what type of toolpath do you use and how do you get it to use the 4th
-
I dont think the 28 pitch would work it would be a 2 start thread wouldn't it?
-
Machining Alloy 110 Class 2
Rick Henrickson 65 replied to Fred @ Slate Industries's topic in Industrial Forum
Machinability The machinability rating of this alloy is 20. (Where Alloy 360 FC Brass is 100). -
Good call on that one Colin!
-
David they are in your work offset page same as your G54 just page down a few then you should see them If you have the option
-
1st attempt at threadmilling. Any advice?
Rick Henrickson 65 replied to RMagnusson's topic in Industrial Forum
comp the tool! -
you may be able to turn off the G15 inbetween G17, G18, G19 and turn back on at first G1 I think it is just alarming out because look ahead is on during plane change. Check with your machinetool distributor Ellison I think for Oregon. Ask for Vince
-
yes, without the G15 it will not check points.
-
oh also I dont think the G15 can change planes between G17, G18, G19 although I am not sure on that.
-
you can change your parameter to unclamp max feedrate
-
Maybe you can have someone sign a confediatality agreement to help you
-
Colin that is how Im doing it now, just added it to this thread for another Idea and thanks for your help!
-
just wanted to bring this back up check new thread you can create curve slice but you need to have a cplane at the z depth you want to cut works great