-
Posts
134 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by deckerc
-
-
you need to rotate your Cplane first then do your toolpath. if you rotate your part the cplane is still top. If I understand you correctly.
welcome to the forum.
I went to school at Penn College a few years ago
-
A lot of times the depth of cut will be deeper than length of the tool, I have seen that error a lot for this reason.
-
my program was not trying to do a helix. it was straight 2 axis arcs and it was giving me i's j's and k's randomly even though everything said to give it r values.
-
I started out with the generic 3 axis fanuc post. the parc section is different and no matter what i set my control def to, it put r's and i's and j's.
-
I had the same problem with a mycenter post. I ended up editing the parc section of the post. I got rid of the if/else statement and left it with only the section that outputs R's. send me your post and I'll see if I can make the same change to yours
-
just tried it to make sure and it worked.
-
jmparis,
have you tried holding done the control key while in the "only" window and check marking lines and arcs?
-
I have reported a few things but got no response. I did not expect to here anything though.
-
your C:mcamxcommonprmopmgrdisplay.prm file isn't set as "read only" is it??
-
go into your group manager and see if it put your imported geometry into a 'group'. if so just delete the group name or set the group to use entities original colors and all will be well
corby
-
I noticed that too. Hopefully we are just missing something simple....
-
When I move my cursor into or out of the graphics window my computer stalls for about 25 seconds. I can change views without any pause. It only does this on this one file (no I can't show it to anyone), and does it on three different computers. Ayn Ideas???
-
go to groups and see if there is a group in there. if so delete it out of the group manager, and it should go back to its original color
-
For anyone interested in my solution to this.
I ended up modifying my post in parc section so there is no i, j , or k output only radii.
My control def is set to put out Radius only and now my post doesn't give it a choice either. I test ran my part using Flowline and Parrelel and all looks good.
thanks for the help guys!
Corby
Big Ben says What's a sophmore jinx????
-
I've been looking too. In V9 we used Camaix, but they are not ready for X yet. I'm currently trying to talk the bosses into buying one from In House Solutions.
-
That is the generic post that came with X. I saw that section but got lost real quick trying to decipher it. I'll look at the mpfan...
-
Time to give up today.
I can't even get my e-mails to go thru today. I sent them again. If it doesn't work this time I'll back up ten yards and punt (tomorrow).
-
Pual,
I sent the e-mail
I have since changed the control def to output only I's J's and K's and then switched to a parrellel tool path. thought everything was good until my tool and holder buried itself in the part. Thank god it was only aluminum.
time for a beer or 6....
Thanks for looking
Corby
-
I set all the arcs to "delta start to center" and the program ran. Hopefully someone figures out how to get all radii.
-
they are all set to radius. I am playing with the arc error settings in the last box on that page now. If I check them all I don't get J' and K's. I'm trying to narrow it down now to which one is causing this
edit:
never mind, it was just putting them further down in the program
-
Paul
I sent you an email too, it is putting a G19 (YZ plane). I only pasted the section of the program where the machine alarmed out, which is also where the first j's and k's came out.
thanks
corby
-
I sent you an email, no access here. When I post the toolpath it doesn't start doing this untill approx line 161 or so.....
Thanks for taking a look
Corby
-
I agree, it is very strange.
this is the generic 3 axis post that came with X.
I can't seem to find any settings that would do that, but I suck at posts
-
I'm posting code for my second time using X. I have a surfacing toolpath with the filter on. My code is coming out like so..
G2 Y-7.611 Z-14.165 R8.837
Y-6.117 Z-12.317 J0. K0.
Y-4.158 Z-10.917 J0. K0.
Y6.117 Z-12.317 R8.92
Y7.611 Z-14.165 J0. K0.
my machine alarms out at this point. the alarm has to do with I's, J's and K's. It is a fanuc control. How can I get the post to stop outputting I's J's and K's?? Tried looking in the post and in the control def. Think I looked too hard and confused myself.....
STL to something ?
in Industrial Forum
Posted
everytime i try this c-hook it runs for a while then gives me a "not enough memory" error and I have to ctrl alt del to kill it.
am I doing something wrong?