i have been using cimco edit/dnc version5 for about 4 years now, no complaints. i have two mills that it runs and have had no problems. irun rs232 cable to both, and drip feeding large programs simotaneously with ease. the editor is user friendly and has a backplot that is a great tool to use for reference checks, for your operators. it is worth the money in my opinion. hope it helps.

i use elite tool sales phone 905-709-9737 [carol]

i have used them for some years now competive pricing and will deliver

definetly use a tapping head and i have had success with dormer taps. if you get your dormer rep in you can also get him to give you their product selector cd which comes in handy lots of usefull info. for repetive tapping use their roll form taps with the proper tap drill size.

hope this helps.also dormer taps are not all that much money.

adobe illustrator works great for converting in .dwg files then you can open with mastercam. i hope you have it or i dont know what eles works

i will see what i can do. like i said i use the seimans post on a mill not a lathe so i dont know what i can do?

we had it digitized and i could spend a few hours to clean it up the file that is. The job was for a customer of ours. I think it is better to buy new a do what most said reverse engineer it. thanks for the input

i have a hyundai mill with seimans 810d control. are you refering to the drill cycle? cycle 81? let me know, i can help you figure it out hopefully.

has anyone broke their tool changer arm on a okk mill? Just curious whether to make it my self or buy it for rude us dollars.

welcome hope you find this forum of some help

have a good nite guys and a big thanks

keith

Thanks guys i got it. it was that i have my own config file not a default so it looks like i saved that chook in there all i did was merge the default colors with my setting and it was good. i will print the screen shot to show what i am talking about

when i put it back in the folder chook error was corrected. i am sorry for the mix up . how to make screen shot to show you guys?

no errors were given when i moved it. when i open a new session i get an error if you tell me how to do screen shot i can show you

in my start/exit i have it defaul to trimetric.dll and start is none and exit is none it didnt make it go way? do i have to reboot the comp?

thanks for looking into it

yes it does

i was checking out some chooks and accidently turned the chook on v7colord.dll how do i remove this? every timew i open a file it is on i need it to go away

thanks for the help

is there anyone out there that does metal engraving of stamps on a router or mill? i am in concord ontario canada. I was wondering how cost effective it would be for me to purchase the art package as compared to having an engraver do it on a pantograph?

thanks for any input

keith

THANKS GUY WHEN I CUT IT I WILL LET YOU KNOW HOW IT TURNED OUT

does anyone know where to buy engraving cutters or have a contact. I am located in Concord Ontario Canada thanks guys

i was wonder if anybody does metal stamp engraving using mcx i dont have the art package i was wondering how to do it i want to leave the letters raised.

thanks

no solids options, if not possible i will machine straight off thre block and put rad on by hand it is only a lead in

thanks

can anyone help me out? i need to fillet the corners together and the put surface on the top of the block. if you could explain how to do this i would appreciate it. thank you in advance.

i put the file on the ftp site under

mcx2_files file name is form punch.mcx

Tha

nk you again

i just bought another mill. it is a hyundai with seimans 810D control on it. i am having a hard time learning this control the machinery dealer negelected to tell me that his guy that was suppost to train me is on holidays till the end of the month. is any body running a mill with this controll on it, my shop is in concord ontario cananda. if any one can help me ?

does any one have good set up sheets that they want to share?