desmotom
-
Posts
137 -
Joined
-
Last visited
desmotom's Achievements
-
Just use a G32 command, this will syncro the spindle. Just put in the m29 rigid tap call out.
-
Our tree spindle pooched out on us today. Any body out there have any ideas if its worth it to send it out to get fixed or do it ourselves, or junk the whole thing completely. The machine is otherwise sound condition. 10hp spindle. Any opinion would help.
-
I used cimco all the time and then I switch jobs and convinced them to get it. Its worth the money for sure. Backplotting catches errors and visually shows you, its great for editing.
-
Yup I found them, thanks.
-
Just wondering where the values are stored in the control and how to get to them. Made an engraving program similar to the one that has been posted on this site. When it adds the values where does it store them?
-
I have made a couple of macros for a fanuc control, now I have to make one for a mazak control. Just wondering what the major differences where if any. thanks
-
Thanks Ill try that
-
I am running a funuc control on a WT 250. I am using program restart to loop the program but I want to limit the number of times it loops. Does anyone know how to acheive this. I have done it on okuma but I am sure fanuc is totally different. Thanks
-
Any one familiar with these units. I have one not repeating to extract the part. Its hooked up to a wt 250 nakamura.
-
Does anyone know the code for spindle sync. on okuma control for tapping. (g32 on fanuc) I need to peck tap on a lathe at sequential depths 3 inches deep.
-
I want to set up based on tools. Z0 front of the part.G54 flip part G55
-
Just wondering if anyone was familiar with a daewoo puma 10 with 10T control. It has work coordinate system (g54-g59) but I can't get it to work properly. Any insight would be greatly appreciated.
-
Dialing in collet chucks on a dual spindle machine
desmotom replied to desmotom's topic in Industrial Forum
Thats the way i was thinking of doing it, dial in the main and use a test bar for the sub -
Need to remove the 3 jaw chucks and replace them with collets chucks. Never done this before and have heard it quite tricky, thought someone out there might have some usefull infput.
-
Does anyone know how to perform this "thread clipping" to debur the leading edge of a thread and is there a way to do it in mastercam version X2