LEV
-
Posts
74 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by LEV
-
Pretty good. Thanks Rick. And how are you?
-
Thanks Doug.
-
I need 1", 1.25" dia. devib. boring bar. What brand would be recomended. need to bore ~8.1" deep in 15-5ss Thanks in advance.
-
go to: operation manager/machine group properties/tool settings tab. There you can set the program #. all operations after you set it will have the same program #.
-
Thanks Strabe.
-
Can't open FTP site. Can you please send it to me if it's not to mach trouble. [email protected] Thanks
-
It works here. all I had to do is extend end of contour in lead out .05" Lev.
-
All my ops. are selected, but MC ignores the last op. if it's a manual entry. ????? Thanks Lev. MC X2 MR2 CP1 Mill Level 3 Lathe Level 1
-
Hi everyone! When I put manual entry operation as the last op. in operation manager, it doesn't show up when I post it. Does anybody knows why? Thanks Lev. MC X2 MR2 CP1 Mill Level 3 Lathe Level 1
-
Please, ignore my previous post. I was thinking of rough cycle were I can't control tool retract amount. Lev. ---------------------------------- X2 MR2 SP1 Mill Level 3 Lathe Level 1 Solid Works
-
It would be nice to be able to control tool retract amount in thread canned cycles. Lev. ---------------------------------- X2 MR2 SP1 Mill Level 3 Lathe Level 1 Solid Works
-
I have the same thing happeninig to me. Sometimes MC will not copy geometry to anothe level. Had to restart MC. Lev ----------------------------------------- X2 MR2 SP1 Mill Level 3 Lathe Level 1
-
Thanks for the reply gcode. But, by minor change I meen changing the nose rad. or even speed or feed makes all of the following dirty. Lev. ------------------------------------------- X2 MR2 SP1 Mill level 3 Lathe Level 1 Solid Works
-
A minor change to one of the toolpaths(sometimes only a click on parameters folder) makes all toolpaths & operations after that became dirty??????? Lev. ------------------------------------------- X2 MR2 SP1 Mill level 3 Lathe Level 1 Solid Works
-
It would be nice to have the ability to renumber levels with increments option in level manager the same way you can do tools in operation manager. That is for both lathe & mill. Lev. ------------------------------------------- X2 MR2 SP1 Mill level 3 Lathe Level 1 Solid Works
-
I also have a crash alarm all the time on roughing cycle with 35 deg. cutter plunge option turned on. Lev. ------------------------------------------- X2 MR2 SP1 Mill level 3 Lathe Level 1 Solid Works
-
Using cutter comp.(G41,G42) in some cases especially in can cycles causes FANUC control to alarm. So I stopped using it. Would be nice to have the easy way to delete unused tools from tool library.(sometime if I do minor changes to the tool & want to save it, MC not always ask if I want to keep both, so I and up with very similar tools in library. Lev. ------------------------------------------- X2 MR2 SP1 Mill level 3 Lathe Level 1 Solid Works
-
Nice idea. Lev. ----------------------------------------------- X2 MR2 SP1 mill level 3 lathe level 1 solid works
-
Sory. I forgot to say that I was using: X2 MR2 SP1 Mill Level 3 Lathe level 1
-
Yes, you do it in different machine groups. One of the parts I was working on, I put everything in one file: lathe, mill & couple of tooling projects for the same part. And looks like MC didn't like it going back & forth from lathe to mill & back to lathe. Sometimes when I'm in mill machine group, MC thinks I'm in lathe & didn't let me do any editing. MC crushed on me several times using this file. Did anyone had anything like this or it just me? Lev.
-
I created a lathe part in X2 MR1. part has two od grooves: 1. square using .094 wide standard insert & 2. full rad using .047R standard insert. When backploting my part in MR1 everything works fine. When I backplot my part in MR2 it doesn't show .047R insert. it does show the toolholder. all other tools are fine. Thanks. Lev ------------------------------------------------ MC X2 Mill3/Lathe entry
-
oops: I agree with you Jaz. Lev.
-
on first one drill: 1700(rpm) x .012(ipr) x 2(# of fluts) =40.8(ipm) on second thread mill: 4000(rpm) x .0026(ipt) = 10.4(ipm) Lev Westwood Precision Inc.
-
you can use screen / copy screen image to clipboard. then paste it into word document. don't pay any attention to background color. there is "set transparent color" option in Microsoft word & excel. I always use it. Lev Westwood precision Inc.