-
Posts
1,281 -
Joined
-
Last visited
-
Days Won
4
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Files posted by Webby
-
Sample - Mastercam X4 Instructor Kit with Lathe
By Webby in Training Tutorials
This is a sample PDF. For more information on this title, visit the store or download the file below.
2,013 downloads
0 comments
Updated
-
Sample - Mastercam X4 Mill Level 3 Training Tutorial
By Webby in Training Tutorials
This is a sample PDF. For more information on this title, visit the store or download the file below.
3,140 downloads
0 comments
Updated
-
Sample - Mastercam X4 Advanced Multiaxis Training Tutorial
By Webby in Training Tutorials
This is a sample PDF. For more information on this title, visit the store or download the file below.
2,705 downloads
0 comments
Updated
-
Sample - Mastercam X4 Lathe Training Tutorial
By Webby in Training Tutorials
This is a sample PDF. For more information on this title, visit the store or download the file below.
2,930 downloads
0 comments
Updated
-
Sample - Mastercam X4 Router Training Tutorial
By Webby in Training Tutorials
This is a sample PDF. For more information on this title, visit the store or download the file below.
1,539 downloads
0 comments
Updated
-
Mastercam X7 Enhancements
By Webby in Tips & Guides
A look at some of the new features available in Mastercam X7, published by CNC Software.
316 downloads
Updated
-
Sample - Mastercam X4 Wire Training Tutorial
By Webby in Training Tutorials
This is a sample PDF. For more information on this title, visit the store or download the file below.
2,328 downloads
0 comments
Updated
-
Mastercam X7 Training Solutions Brochure
This is an 8 page Mastercam X7 Training Solutions brochure published by In-House Solutions showcasing the Mastercam related books, eBooks and video products. Everything in this brochure can be purchased by contacting your local Mastercam reseller or ordered online in the store.
498 downloads
0 comments
Updated
-
Sample - Mastercam X4 Design Training Tutorial
By Webby in Training Tutorials
This is a sample PDF. For more information on this title, visit the store or download the file below.
2,577 downloads
0 comments
Updated
-
Mastercam X7 Wire Brochure
This is the official Mastercam X7 Wire brochure published by CNC Software.
214 downloads
0 comments
Updated
-
Sample - Mastercam X4 Mill Level 1 METRIC Training Tutorial
By Webby in Training Tutorials
This is a sample PDF. For more information on this title, visit the store or download the file below.
2,097 downloads
0 comments
Updated
-
Mastercam Swiss Expert Brochure
This is the official Mastercam Swiss Expert brochure published by CNC Software.
401 downloads
0 comments
Updated
-
Sample - Mastercam X4 Project Workbook
By Webby in Training Tutorials
This is a sample PDF. For more information on this title, visit the store or download the file below.
2,136 downloads
0 comments
Updated
-
Mastercam X7 Lathe Brochure
This is the official Mastercam X7 Lathe brochure published by CNC Software.
419 downloads
0 comments
Updated
-
STL Viewer
ModuleWorks, the people who do the advanced 5X toolpaths and MachineSim in Mastercam
have a free STL Viewer for both PCs and Andriod smartphones and tablets.
930 downloads
0 comments
Submitted
-
Sample - Mastercam X4 Handbook Volume 1
This is a sample PDF. For more information on this title, visit the store or download the file below.
3,571 downloads
0 comments
Updated
-
Post Info Submission Form - General
By Webby in Post Processor Request Forms
This form is required to be completed in order to request a general post processor from In-House Solutions. Once the form has been filled out, its contents can be submitted via email from within the form using the "Submit by email" button.
720 downloads
Updated
-
Post Info Submission Form - Lathe
By Webby in Post Processor Request Forms
This form is required to be completed in order to request a general post processor from In-House Solutions. Once the form has been filled out, its contents can be submitted via email from within the form using the "Submit by email" button.
970 downloads
Updated
-
Post Info Submission Form - Mill
By Webby in Post Processor Request Forms
This form is required to be completed in order to request a general post processor from In-House Solutions. Once the form has been filled out, its contents can be submitted via email from within the form using the "Submit by email" button.
1,722 downloads
Updated
-
Post Info Submission Form - Router
By Webby in Post Processor Request Forms
This form is required to be completed in order to request a general post processor from In-House Solutions. Once the form has been filled out, its contents can be submitted via email from within the form using the "Submit by email" button.
418 downloads
Updated
-
Post Info Submission Form - Wire
By Webby in Post Processor Request Forms
This form is required to be completed in order to request a general post processor from In-House Solutions. Once the form has been filled out, its contents can be submitted via email from within the form using the "Submit by email" button.
499 downloads
Updated
-
Mpmaster - Master G-Code Post - Version 8
By Webby in Mpmaster (all versions)
Based on CNC Software's master mill post - Mpfan - this post has additional features.eMastercam.com is operated by In-House Solutions Inc. - Authorized Canadian Distributor. Please do not email post requests or support questions. For post requests or support contact your local reseller.
Click "download file" below to download Mpmaster for V8 - our master configurable 4-Axis G-Code post. This includes Mastercam's Mp Mill Post Processor Executable V8.21.
Updated May 2, 2002
Special Features
File header tool table - configurable for Predator Virtual CNC and MetaCut View tool definition and stock comments Enhanced header entries Single rotary axis prefix setting No output of "A" for 3-Axis programs Sets WCS style in post, not in Misc Values Manual Entry 1005 for G-Codes, 1006 for comments Min/Max Z depth comments Stock left comments Coolant off with last Z move Optional support for Acramatic 2100 style helical moves Lock on first WCS for use for 4-Axis rotary toolpaths
Sample Settings
Use this list of switches at the top of the post to influence the output code, and to enable or disable special features.
# -------------------------------------------------------------------------- # General Output Settings # -------------------------------------------------------------------------- spaces : 1 #No. of spaces to add between fields omitseq : no #Omit sequence no. seqmax : 9999 #Max. sequence no. arcoutput : 0 #0 = IJK, 1 = R no sign, 2 = R signed neg. over 180 arctype : 2 #Arc center 1=abs, 2=St-Ctr, 3=Ctr-St, 4=unsigned inc. breakarcs : no #Break arcs into quadrants? hel_2100 : no #Acramatic 2100 style helical moves, 0=no, 1=yes usecanned : yes #Use canned drilling cycles? Set to no for long output. wcstype : 2 #0 = G92 at start, 1 = G92 at toolchanges, 2 = G54, 3 = Off force_wcs : yes #Force WCS output at every toolchange? stagetool : 0 #0 = Do not pre-stage tools, 1 = Stage tools tool_table : 1 #Tool table, 0=no, 1=yes, 2=Predator VCNC, 3=Metacut View output_z : yes #Output Z Min and Z Max values (yes or no) cool_zmove : yes #Coolant off with last move maxfeedpm : 500 #Limit for feed in inch/min maxfeedpm_m : 10000 #Limit for feed in mm/min use_gear : 0 #Output gear selection code, 0=no, 1=yes max_speed : 10000 #Maximum spindle speed min_speed : 50 #Minimum spindle speed sextnc NC #NC extension override Typical Vertical 4-Axis Settings
# -------------------------------------------------------------------------- # Rotary Axis Settings # -------------------------------------------------------------------------- srotary "A" #Rotary axis prefix vmc : 1 #0 = Horizontal Machine, 1 = Vertical Mill rot_on_x : 1 #Default Rotary Axis Orientation, See ques. 164. #0 = Off, 1 = About X, 2 = About Y, 3 = About Z
Typical Horizontal 4-Axis Settings
# -------------------------------------------------------------------------- # Rotary Axis Settings # -------------------------------------------------------------------------- srotary "B" #Rotary axis prefix vmc : 0 #0 = Horizontal Machine, 1 = Vertical Mill rot_on_x : 2 #Default Rotary Axis Orientation, See ques. 164. #0 = Off, 1 = About X, 2 = About Y, 3 = About Z
479 downloads
0 comments
Updated
-
X7 Post Update Notes
By Webby in Post Processor 'How To' Info
A document explaining how to update pst and psb files for X7.
2,734 downloads
0 comments
Updated
-
Mpmaster - Master G-Code Post - Version 9.1
By Webby in Mpmaster (all versions)
Based on CNC Software's master mill post - Mpfan - this post has additional features. eMastercam.com is operated by In-House Solutions Inc. - Authorized Canadian Distributor. Please do not email post requests or support questions. For post requests or support contact your local reseller.
Click "download file" below to download Mpmaster for V9.1 SP2 - our master configurable 4-Axis G-Code post.
Updated June 29, 2005
Special Features
File header tool table - configurable for Predator Virtual CNC and MetaCut View tool definition and stock comments Enhanced header entries Single rotary axis prefix setting No output of "A" for 3-Axis programs Sets WCS style in post, not in Misc Values Manual Entry 1005 for G-Codes, 1006 for comments Min/Max Z depth comments Stock left comments Coolant off with last Z move Optional support for Acramatic 2100 style helical moves Lock on first WCS for use for 4-Axis rotary toolpaths Sample Settings
Use this list of switches at the top of the post to influence the output code, and to enable or disable special features.
# -------------------------------------------------------------------------- # General Output Settings # -------------------------------------------------------------------------- spaces : 1 #No. of spaces to add between fields omitseq : no #Omit sequence no. seqmax : 9999 #Max. sequence no. arcoutput : 0 #0 = IJK, 1 = R no sign, 2 = R signed neg. over 180 arctype : 2 #Arc center 1=abs, 2=St-Ctr, 3=Ctr-St, 4=unsigned inc. breakarcs : no #Break arcs into quadrants? hel_2100 : no #Acramatic 2100 style helical moves, 0=no, 1=yes usecanned : yes #Use canned drilling cycles? Set to no for long output. wcstype : 2 #0 = G92 at start, 1 = G92 at toolchanges, 2 = G54, 3 = Off force_wcs : yes #Force WCS output at every toolchange? stagetool : 0 #0 = Do not pre-stage tools, 1 = Stage tools tool_table : 1 #Tool table, 0=no, 1=yes, 2=Predator VCNC, 3=Metacut View output_z : yes #Output Z Min and Z Max values (yes or no) cool_zmove : yes #Coolant off with last move maxfeedpm : 500 #Limit for feed in inch/min maxfeedpm_m : 10000 #Limit for feed in mm/min use_gear : 0 #Output gear selection code, 0=no, 1=yes max_speed : 10000 #Maximum spindle speed min_speed : 50 #Minimum spindle speed sextnc NC #NC extension override Typical Vertical 4-Axis Settings
# -------------------------------------------------------------------------- # Rotary Axis Settings # -------------------------------------------------------------------------- srotary "A" #Rotary axis prefix vmc : 1 #0 = Horizontal Machine, 1 = Vertical Mill rot_on_x : 1 #Default Rotary Axis Orientation, See ques. 164. #0 = Off, 1 = About X, 2 = About Y, 3 = About Z
Typical Horizontal 4-Axis Settings
# -------------------------------------------------------------------------- # Rotary Axis Settings # -------------------------------------------------------------------------- srotary "B" #Rotary axis prefix vmc : 0 #0 = Horizontal Machine, 1 = Vertical Mill rot_on_x : 2 #Default Rotary Axis Orientation, See ques. 164. #0 = Off, 1 = About X, 2 = About Y, 3 = About Z1,294 downloads
0 comments
Updated
-
Mpmaster - Master G-Code Post - Version X
By Webby in Mpmaster (all versions)
Based on CNC Software's master mill post - Mpfan - this post has additional features. eMastercam.com is operated by In-House Solutions Inc. - Authorized Canadian Distributor. Please do not email post requests or support questions. For post requests or support contact your local reseller.
Click "download file" below to download Mpmaster for X MR1/SP2 and above. It's our master configurable 4-Axis G-Code post which is a full X version with Machine Def / Control Def integration. Rotary settings are still configured in the post, not in the machine definition.
The Z2G file extension indicates a Zip2Go file created by X. You can associate these files with WinZip. Ensure that you preserve the directory structure when extracting. This file contains the post, the Control Definition, and a generic Machine Definition.
Email feedback to our Post Department.
Updated August 23, 2006
Special Features
X Coolant support X comment support Compatible with Machine Def changes for vertical/horizontal 4-Axis table machine configurations File header tool table - configurable for Predator Virtual CNC and MetaCut View tool definition and stock comments Enhanced header entries Single rotary axis prefix setting No output of "A" for 3-Axis programs Sets WCS style in post, not in Misc Values Min/Max Z depth comments Stock left comments Coolant off with last Z move Optional support for Acramatic 2100 style helical moves Lock on first WCS for use for 4-Axis rotary toolpaths574 downloads
0 comments
Updated