integrex 200sy won't perform 2nd spindle x-y milling on b-axis angles (like 135 deg) (g126 alarm) i have the post and it works fine on the front (any angle) & at 180 deg on the 2nd spindle what am i missing i have the 9125 macro i love the challange of a new machine

thanks all as diameter isn't the problem a consistant seat from the drill point is a small dwell gaulds while no dwell seems to pull material from floor i've been around 35 sfm & 1.25%$^%$@# ipm but coated hss sounds good mondays bite [ 02-25-2002, 11:57 PM: Message edited by: rwade ]

try a plunge rate of 75 ipm or so you will be surprised

solids, like surfaces are nice tools but... ...YOU still get to make the part.

i am drilling 5/16 x 2.2 deep and need to hold +/-30 min on the bottom. .302 pilot then .3125 3flt carbide drill galding on bottom help!!!

HI THERE I WOULD LIKE TO CONVERT BITMAPS TO DXF OR IGES OR SOMETHING COMPATIBLE W/V8, FROM MY HP SCANJET 3300C. THANKS FOR ANY SUGGESTIONS RICH

1/4" data flute 3flt 4500+ rpm 20-25 ipm all day long