Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
Does anybody know of any heat treat shops that can heat treat 7075-01 forging to 7075-t73 and quench with glycol.
In the Ohio area prefered.
Thanks in advance.
Does anybody have any expirience machining this stuff, we have cut it before but have had alot of trouble with it bowing.
Any ideas would be helpful.
Thanks in advance
We have a Femco BMC-110 boring here and we are noticing that the spindle seems to be growing. We have been doing some tests on it this morning and the spindle grew .007 in the first 15 minutes running @2000 rpm, after the first 15 minute run it seems to be growing about .0015 for every 15 minute run,we let the machine set idle for about 10 minutes and the spindle shrank .002.
Has anybody had this problem with a Femco mill or any other mill ?
Any help would be apprecitated
I,m trying to draw a custom tool up(step drill), and I need to be able to backplot and verify with it. I drew half the tool up on a seperate level then used the custom level option in the tool parameter page , but when I backplot the tool it does not match the dimensions that it was drawn to.
Smallest dia. should be .224 and it measures .042 instead.
Running X3,what am I doing wrong.
Thanks in advance
We have 2 seats of Mastercam X3 here, and we are having trouble using the fast point option on one computert, when entering x,y,z values we have to click the fast point icon for each set of numbers, the other seat you can enter x,y,z values and hit enter then go right on to the next set of values .
I'm sure it is something we have set wrong.
Any help would be appreciated.
What has happend to the Cimco DNC communication icon? I have it save under the file toolbar state fo my communicator and I am using Cimco DNC to communicate. But I get an set-up window to set up a michine and when I type in the new machine name it give me an error. If I go though the Cimco editor and hit transmit it works fine.
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.