Tri-Tech
-
Posts
33 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Tri-Tech
-
Andrew It's a 1-5/16 Radius cutter (1.312) What you suggested would work, but you need a bigger radius cutter to do that. I'm watching you, be careful Ernie [ 09-20-2002, 01:17 PM: Message edited by: Tri-Tech ]
-
Andrew, quote: RFS - (Regardless of Feature Size) No Fitting Permitted Fitting is Permitted and has to be done if there is no datum callouts associated with the profile or position tolerance. Ernie
-
quote: Lobing occurs in all Renishaw probe heads Sure blame it on Renishaw Change the blueprint radius +/- callout to a profile tolerance and the problem goes away. Ernie
-
There is only four other 5-axis programmers out here. Come on there must be more then that Ernie
-
MillTurn, thanks for the your time. We don't need to post it, we can see a Rapid move with Backplot. Rapid from Clearance to Approach height, feed to start of lead-in, feed in length,thickness and height values simultaneously. Ernie [ 09-04-2002, 07:42 PM: Message edited by: Tri-Tech ]
-
This one needs attention. We need tools that work
-
Try Analyze Dynamic Ernie
-
This sounds like the pick point menu? If so then you can use the right mouse key then turn off the Auto Cursor, this way the Point selection will stay modal. Did I get it right? Ernie