Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
Well now I installed the new graphic card on my system, my system data is now:
MS XP Pro SP3
Dell Precision T5400
Intel Xeon CPU
E5410 @ 2.33GHz
3.25GB ram
Nvidia Quadro FX1800, 768mb ram
It didn't help, the system still crashes But the graphic on the screen is much more fluid now, that's nice
Next step is to install win7 64bit on the system and 8gb ram, dont know if it have any effect, but I will give it a shot.
I will try to install the graphic card on the MS XP system first, so that I can confirm if it has any effect at all, I realy hope it do, I have had 20 or so crashes today
I have purchased a NVIDIA Quadro FX 1800 today, when i recive it I will write a comment about how it behaves.
I have also purchased windows 7 64bit and 8GB ram, I hope that mastercam will be able to use a little more ram then.
Well it is not the newest box's anymore but the system info is:
1.
MS XP Pro SP3
Dell Precision T5400
Intel Xeon CPU
E5410 @ 2.33GHz
3.25GB ram
Geforce 8600GTS
2.
MS XP Pro SP3
Intel Core 2 CPU
6700 @ 2.66GHz
3.12GB ram
Geforce 8800GTS
3.
MS XP Pro SP3
Pentium 4 CPU @ 2.8GHz
3.12GB ram
Geforce 6200
The only thing that mastercam support recommends is the geforce graphic cards, the don't recommend any special geforce graphic card.
What would you recommend as a minimum graphic card?
When I transform toolpaths it offen occurs that mastercam crashes.
When I use mastercam I press ALT+t so that I can see my toolpaths, I also press the icon "Show only selected toolpath" (I think that is the name) in the operations panel. If i start mastercam and don't press ALT+t and "show only selected toolpath" then I will be able to transform without mastercam crashing
We have three mastercam stations and the problem is the same on all stations and I belive (as far as I remember) that I have had the problem in mastercam X3, X4 and X5. I have talked with the danish support team, they have never heard about the problem before...
Have anyone had the same problem? I'm soon going nuts
Now I have tried the new file (inch), this gave me another time, our main system
Asus P5D MB
4GB ram
Intel core 2 duo 6700 2.66Ghz
8800GTS video card
Mastercam X2 MR1 sp1
Did the calculations in 6min 30sek, quite nice actually
Our second pc system
Dell Dimension 5000
1GB ram
P4 2.8Ghz
Mastercam X2 sp1
Did the calculations in 13min 20sek
We plan to by a Haas SL30 CNC lathe in the near future, do any one know anything about these machines? Does it perform well, does I have any issues I should know about?
I found the file im the metric version, i used a total tolerance of 0.00254mm(.0001") on all three operations, time: 4min 11sek
System
Asus P5D MB
4GB ram
Intel core 2 duo 6700 2.66Ghz
8800GTS videocard
Mastercam X2 MR1 sp1
I quite agree with you bogusmill, I realy hope MC will go multi threaded in X3, that must give at kick in performance, just think, to go from a single core to quad core, kabooom....
Could anyone try to mail me the test file HST-CORE-HORIZONTAL-RASTER.MCX, I would realy like to try it on my system, to find out if my system is as bad as i suspect it to be my mcx disk 2 has an error
mail: [email protected]
quote:
Cadcam
I to, do ALLOT of scallope toolpaths and needed more speed and had a good box but after testing I was able to cut 65% of my time.
What do you mean by after testing you was able to cut 65%, after testing different hardware or setting up the system?
I started this topic: the other day, Running mastercam X2 on a core 2 duo processor do you think that there would be any adavntage by using a quad core processor?
We bought a new pc not long a go, it's a intel core 2 duo running at 2.66ghz, 4gb ram, asus p5 mb, nvidia geforce 8800gts if i remember correct.
Our old pc a dell p4 3.0ghz was getting a littel slow, so we went for the new one, but it isn't as fast as i hoped for, when i open the windows task manager - performance, i can see that the to processor cores is running at a max of 50%, dosen't mastercam X2 mr1 not support 2 processors or could i have a problem with my configuration?
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.