Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
I am also having problems finding where to change my default setup sheet. I though it was in the system config. I was just in it yesterday but now I cannot find it. On my other pc I had it default to x+. Can that still be done?
I hope someone can help me out. I read through every other post I could find and I am still Stuck.
Thanks again.
somone please tell me what I am doing wrong. I installed x+ into this directory C/mcamx/Mcamx4/chooks and I also downloaded the language file to replace the original. It shows up in my tool bar states but when I turn the tool bar on I get a small box with an x but thats it. I know its somthing easy But I am just missing it I hope.
Thanks in advance
When I download x+ do I need to put it into the chook directory or can I just open from where it is. I do not see a x+ folder in the chook folder unless I create one. Do i need to create a folder myself??
THanks
Where do I do that. When I download x+ and open it it just goes straight into the install. How do I see the individual files? Do I need to install it in the chook folder? Thanks
I had x+ installed on my old xp computer and now I have a new windows 7 computer and I cannot seem to be able to get x+ to work. It keeps comming up in german. Someone please walk me through the steps to download and where to install each file in the order it needs to be done. I did a search and read through some old posts With no luck. I had no problem before but that was a couple years ago and I do not know what I am doing wrong.
Thanks for any help .
Brian
I am trying to import the dxf file from mistubishi's web site for there AJX Feed MIll So I can get a More accurate verify for surfacing.Im not sure the right way to do this. Any help would be great.
Thanks
x4 mu3
Between tungaloy and mitsubishi, which one do you think takes less horsepower cutting at the same surface feeds and depths of cut?
Has any one used the kennemental high feed mills?
thanks again for your guys input!
Good morning all,
I was looking for recomendations on a good high feed mill to be used to cut p-20 and 4140 using 50 taper hass and a takumi. I wanted to know what you guys are using and why one might be better than another. We currently use mostly ingersoll and seco for our other insertables. It will mainly be used for roughing 3d surfaces. Our company doesnt like to spend money on tooling so we only get one chance at this. Any help would be great.
Thanks in advance.
Good morning all,
I was looking for recomendations on a good high feed mill to be used to cut p-20 and 4140 using 50 taper hass and a takumi. I wanted to know what you guys are using and why one might be better than another. We currently use mostly ingersoll and seco for our other insertables. It will mainly be used for roughing 3d surfaces. Our company doesnt like to spend money on tooling so we only get one chance at this. Any help would be great.
Thanks in advance.
I am not sure how old it is. I thought it would have been updated with the x4 upgrade and update post. But no I do not have that x style coolant in mine. Everything else works perfect.
This is what I did but it still doesnt use the m67 to shut of the air. What am I doing wrong. I have tried checking both boxes and unchecking 1 or both on the machine def page.
# Coolant M code selection
sm09 : "M9" #Coolant Off
sm08 : "M8" #Coolant Flood
sm08_1 : "M57" #AIR BLASTER
sm08_2 : "M8" #Coolant Tool
sm09_1 : "M67" #Air Blaster Off
scoolant : "" #Target for string
I did search for scool50 and not found
Thanks again.
Both of the options on top the coolant command page are checked. My enable/disable options are on or off. Not m-codes.I tried putting m57/m67 in the to turn on my air and unchecking the 2 options on the top of the page but then it did not post anything. Is there somthing in the post I would need to change?
I have been meaning to do this for a while. I did change machine def to say air blaster in place of mist. I then changed the post for the mist code to m57 but in the post there is only 1 option to turn the coolant off. How do I tell it to use a m67 to turn the air blaster off???
Thanks
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.