FTI2007
-
Posts
355 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by FTI2007
-
When I select a point it fills it out to 6 places. I changed this once before but it was not in windows 7. It was in windows under somthing that made no sence to me but it worked.
-
YES Exactly
-
I know it can be changed because I have done it before. Right now it displaying 6 places behind the decimal. 3 Is all I need. I just cannot remember how I did it before. I thought it was in somthing in windows.
-
Im talking about the operation manager. Like setting the depths of a cut.
-
How do I change how many places after the decimal mastercam shows? Thanks
-
I Loaded firefox and now it works. I do not have a lot a time to figure out why it quit working. I also assume it was an update somewhere. I update everything as I am notified to do so if its not automatic
-
Ok I will try firefox. Just seemed odd that it worked in chrome until a couple weeks ago. Thanks
-
I am still having trouble with this if anyone else can help. I dont see a settings tab. Im probably missing it.
-
where would I find that in google chrome?
-
My logo shows up in print preview but it does not show up when I print it. I have tried different browsers and they all do the same thing. It was working fine but now has stopped. Any ideas would be great. Thanks
-
ok I will give that a try when my material comes in. I looked at the database and it seemed like they were running higher rpms so thats is what I was going by. Thanks for the help.
-
Just a small block in a vice in a 40 taper machine. I was goin to try 10% width and .006 ipt and 800 sfm
-
Basically just looking for speeds and feeds for dynamic area mill in CRS pocket 1.00 deep using .500 general uncoated 4 flute carbide. Thanks
-
Ok thanks. I also got it to work if you use helical bore instead of contour ramp.
-
I am trying to have less posted code when doing a helix or ramp down 7 inches deep. Every option I have changed in the control arc page doesnt change the posted code. it stills posts xyz moves every few thou movements. Anything else I can do. I am ramping at 2 degrees and the machine can not keep up with the code and jerks to much. Thanks
-
We have mostly haas and a fadal and a couple fanuc controls. I will have to experiment a little I guess. thanks guys
-
I see mine is set to break at 180 degrees. Should that be changed to quadrants as well? What is the difference? Thanks again.
-
thanks, Is there any reason not to have it set to radius all the time? Currently it is set to delta start to center. All planes was already checked.
-
How do I get it to post our using R instead of I's and J's so I get a smaller program if For example Im ramping down 7 inches in a 2.375 hole with a 2.00 cutter Thanks
-
ok I got it to work with firefox after turning on print background. I couldnt find that option in chrome. Just curious where to the screen shots get saved to. I have never used that feature before. Thanks again for your guys help
-
How do I change which browser it uses? I do not have explorer but I have firefox installed already.
-
Well I got my logo to show up until I print and it Does not show up on print preview. I am using google chrome. It worked in x5 so I'm not sure what it is I need to do or what changed. Any Ideas?? Thanks
-
Thanks. Got it.
-
I am still having problems with the logo. Maybe you can see what I am doing wrong. Is there somthing I am missing? /* company logo <div> - location and size of image*/ .LOGO{ position:absolute; /* size of your logo */ width:300px; height:61px; /* position of your logo */ left:8px; top:8px; /* location of your logo */ /* local */ /* background-image:url(file:///c:/logo.png); /* internet */ background-image: Thanks
-
And how do I get it to only display each tool one time. I dont need it to display for each separate tool path. Thanks