+1 To Collins' Idea

I use lines and it works pretty well.

Mike 

Like Ron said, set up probing to ensure correct loading. Set up tool load monitoring as well. It will work well on tools of that size.

Mike 

Yes. Look ahead can screw things up big time in Macros. I'm always throwing in G53's or G4's to block "pre-reading".

Mike

Yes. Mill a truncated thread start "Higby". This is often required here.

Mike 

Yes. Planes have become unstable the last few version IMO. 

Mike 

Sweet setup dude. 

Haha I always knew you could create planes with lines, just not that they would remain associative after moving/rotating.

Mike 

Thanks G!

      This is very helpful.  I was not aware planes maintained associativity to lines in this way. I have always only used points and then did incremental rotations. I think this will be a big time saver going forward.

Mike

  My workflow is the same as GMS1. I create a point and associate the planes with it so that it moves whenever the geometry moves. This has worked well as long as I can remember until 2020. Files migrated in from previous versions still  maintained associativity but new parts would not allow it. This is a huge PITA on parts with a lot of planes where we need to move things around for different machines, workholding etc. All in all planes reliability took a big step backward in 2020 as we have seen some very weird behavior. I'd be scared to death if we didn't have Vericut. Good to hear associativity is fixed. One thing that was discussed while I was at CNC software years ago was creating a wireframe entity that was similar to a genome that could be tied to a plane. That way you could dimply move it around with dynamic xform or whatever and change the location, angle more easily. I'd love to see this.

Thanks,

Mike 

Can anyone confirm that you can make planes associative to geometry again in 2021?

Thanks,

Mike 

I do what Gcode does unless I specifically need associativity. Way faster and more control.

MIke  

Quote

Then go back and take a feedmill to ramp/plunge it off.  So far it's working but I'll try anything.

This is what I find is necessary in Inconel.

Mike 

Tool eye (probe) may be triggered.

Mike 

Has there been any progress on this? As far as I can tell, there is not a way to make a plane associative to a point in 2020. Files that come in from 2019 work fine. I've found the plane manager to be very buggy in 2020. Even flip flopping planes on occasion. I'd be scared to death if we didn't have Vericut.

Mike 

Coming up on 13yrs... Some great info here.

Mike 

Code meter is the way to go. Been far more reliable and more responsive then nethasp.

Mike 

Quote

I can slow it down enough to see what's going on.

Very nice. Just installed Fri.

Mike 

Thanks Matt!

That should come in handy.

MIke 

3 hours ago, Matthew Hajicek™ - Conventus said:

Have you tried turning the 3DConnexion driver off and on again or restarting the computer?

Ended up re-installing the driver and that worked. Out of curiosity, how do you turn it on off?

Thanks!

Hey Guys,

       After a recent re-start, all of my Space Pilot Pro buttons are no longer working in Mastercam. Everything works in solidworks and other softwares but no dice in 2019 and 2020. Motion controller works though. Tried re-loading a backup copy of .workspace but still nothing. Went through the keyboard shortcuts in MC and 3D connexion and everything matches up. Any ideas? 

Thanks,

Mike 

Thanks Zaffin,

         That's kinda what I was realizing.

MIke 

Unfortunately, still hanging up on axis sub ops in 2020.

Mike   

Excellent. I'll check it out and give it a try!

MIke

Very interesting... The thing is though, it isn't endless. I've posted these files out overnight and they work. Eventually....

Thanks! 

Mike