gcode, you trying to flush out RandleXX?

Disadvantage #4 You will have to update your profile information per Thad Sticky.

Thad's Sticky

McamNut it is the HTML tag marquee /marquee

Marquee tag

Thanks everyone.

I now know that I need to send in a enhancement request to shade the solid drive face when using show.

Just updated drivers to 84.26 same results.

Runnig a NVIDIA FX500 Version 70.78

A dive surface will shade with show but a drive solid face will not. Is this correct?

Is it possible to see a driving solid face shaded with “Show…”? I can only see them in wireframe. I am having difficulty seeing whether I have selected faces that have neighboring faces already selected. If I use show it is impossible to tell whether the face is selected because only the wire frame is displayed.

If I use solid drive faces in an operation and Only Display Associated Geometry is selected the entire solid is displayed. I would think it would display only the solid face that is selected not the whole solid.

Am I missing something or is this just the way it works.

Thanks

Already unchecked.

Thanks

I have two icons for MR2 one set up for milling /m and one set up for lathe /l. In the default MD for each I have selected the tool bar state that should load with each icon. MC alwasy reverts to the previouosly opened tool bar state and ignors the tool bar defined in the MD.

The closest thread I found

+1 merge and save as

Copy paste MC? ?

Thanks for the mail.

Would someone send me a copy of the MPL beta or the post John is looking for .

John, I have a NL2000SY, I will try to dig up some code to send you.

Thanks,

Argh

That blows, I sit here all night waiting for a question I can answer first and you take it away from me.

Keep up the good work Thad.

Gotta love this forum.

Select all ops you want to post, right click, Edit Selected Operations, Change NC File Name...

Then post.

I run dual 20" no problems.

+1241.1

Form tap.

Try re-running your current .Hcode. Check you HaspX.exe, what is your maintenance expiration date.

See Thads Sticky thread

I just tried running MR2 with my old MR1 icon that was on my task bar. It opened a dialog box and ask if I agreed to the terms of the license. Clicked yes MR2 opened.

Installed MR2 overwriting MR1. When starting now the X logo comes up and says Checking HASP... Then hangs, Cimco opens and has a text file named TermsOFUse.txt. I am sure that I agreed to the terms of use during install. Tried a repair rebooted no go.

Ran the update hasp setup, drivers are HASP HL Drive Version 5.20

Open HaspX.exe all the licensed modules are correct and hasp is found.

Forgot to add that V9 still runs.

Thanks for any ideas

Most of the time I rigid tap but for high quantity runs I use Tapmatic heads. It takes some trial and error to get it set up, but after that it flies.

I run 0-80 roll tap in aluminum 0.190 deep 4100 RPM Tapmatic NCR15. The NCR is good up to 6000rpm but I have always been chicken to run it that fast.

I dont know if the tapping head would help you breakage problem, but it would shorten your cycle time.

This is how I read what you typed.

ABS REL

X1.1234 X6.7890

you want

ABS REL

X1.1234 X1.1234

The following works on a 16i.

POS - REL - OPTR - type axis leter(XYZB) - type axis(XYZB) value to match absolute - PRESET

I might have the sequence out of order but it is late and I not at the control. If it dosnt work I will go step by step on the control tomorrow.

NTMA has a book about costing and pricing. The book is definatly not light reading.

ntma.org

Costing, Pricing & Financial Manual

NTMA's "how to" manual developed especially for your metalworking business. Written by Barry Miller, one of the country's foremost financial experts, it has important contributions by Douglas Hicks, CPA, CMC. Barry Miller, with years of experience working with contract metalworking companies, will show you how to work more closely with your accountant to bring in higher profits and more stable business growth.

You'll learn more about: estimating, job costing, chart of accounts, costing and pricing issues for the 21st Century, break even analysis, cash forecasting, financial statement analysis and much more.

I have seen this when opening V9 files in X.

unnamed drill point F12.

unnamed drill point 1 F0.

unnamed drill point 2 F0.

unnamed drill point F12.

Topic: MR1 + a solid drill point somtimes= F0.

Do you have a feed rate on the parameter page?

Where do you keep the monkeys?