IE8

Never mind. Used Google Chrome and it worked fine.

I get as far as the download page and accept the terms of use tic box, but the download links are all dead.

-

It is turned on in both Verify and Backplot.

Bug?

Visualy that worked but now I have no cutter comp.

On a simple circle mill with only roughing selected, using control comp on a .74 Dia. bore using a 1/2" end mill with .032 roughing stepover it is not simulating cutter comp with verify or backplot. It worked fine in X4 but not X5. And yes simulate Cutter comp is checked in my settings. Did I miss another setting?

Thanks guys...

Hi guys, Is there any way to force a user to run verify before a program is posted?

I sometimes use macro statements such as this. #7021=-30.3738(WRITE G54 P2 X ZERO) #7022=-17.9974(WRITE G54 P2 Y ZERO) #7023=-19.7293(WRITE G54 P2 Z ZERO) No operator error.

Do you have "output arc moves for helixes" checked in your rough/finish param?

Thanks Jim, I guess I will have to stay away from that nasty little undo.

1)All Geometry was created and file was saved. 2)created solid body from the geometry. 3)extruded several holes thru body 4)cut several chamfers on the body 5)after I cut a chamfer and wanted to delete it,instead of a right click on the chamfer in the tree to remove it I selected undo under the file menu and all geometry and the solid was gone (screen went blank). It was restored after selecting redo.

when I select undo while creating a solid, my whole model gets deleted?