We use prodrill as it is very flexible and very affordible!

ok thanks:)

Good morning everyone, I was just wondering if anyone knew when x9 hle will be coming out. thanks:)

with the one above I did no edits just wrote it in like this and i know its wrong but atleast you can see it 7. "Thru Coolant - M07" 50. "Bottom Wash- M50" 8."Flood Coolant- M08" 9."Coolant Off- M09"

I seemed to have got it with just this,dunno how lol [canned text] 1. "Stop - M00" 2. "Op Stop - M01" 3. "Bld on" 4. "Bld off" 5. "Dwell - G04 P1" 7. "Thru Coolant - M07" 50. "Bottom Wash- M50" 8."Flood Coolant- M08" 9."Coolant Off- M09"

Doesnt seem to work if I add if cantext$ =12, [ pbld, n$, "M07", e$ it comes out like this N250 M07 N260 M12

MP v11.0

I am not sure exactly what you are getting at.

N120 M50 N130 M11 any help appreciated

Ok I have added these 3 codes but my program adds the mcode m50 and m11 and m07 and m12 and m08 and m13 See program example below. if cantext$ =11, [ pbld, n$, "M50", e$ ] if cantext$ =12, [ pbld, n$, "M07", e$ ] if cantext$ =13, [ pbld, n$, "M08", e$ ] 1. "Stop - M00" 2. "Op Stop - M01" 3. "Bld on" 4. "Bld off" 5. "Dwell - G04 P1" 6. "Chip Conveyor On" 7. "Chip Conveyor Off" 8. 9. "" 10. "" 11. "Bottom Wash - M50" 12. "Thru Coolant - M07" 13. "Flood Coolant - M08" O0001 (FBM TEST) (KITAMURA2) (MACHINE GROUP-1) (MCX FILE - \\JPBFS01\COMPANY\COMMONAREA\MIKE STAPLETON\FBM TEST.MCX-7) (DATE - APR-02-2015) (TIME - 9:23 AM) (T7 - 10. SPOT DRILL - H0 - D0 - D0.3937") N100 G00 G17 G20 G40 G80 G90 N110 G91 G28 Z0. N120 M50 N130 M11 N140 G90 G53 X0. Y0. N150 T7 M06 (10. SPOT DRILL) N160 (MAX - Z1.) N170 (MIN - Z-.128) N180 G00 G17 G54 X-7.375 Y-1.5 S329 M03 N190 G43 H0 Z1. N200 G94 N210 G98 G81 X-7.375 Y-1.5 Z-.128 R.1 F.49 N220 X-4.125 Y-2. N230 X-.625 Y-1. N240 G80 N250 M07 N260 M12 N270 X-6.125 Y-2. N280 G43 H0 Z1. N290 G98 G81 X-6.125 Y-2. Z-.1181 R.1 F.49 N300 X-2.875 Y-2. N310 G80 N320 M08 N330 M13 N340 X-5.375 N350 G43 H0 Z1. N360 G98 G81 X-5.375 Y-2. Z-.1009 R.1 F.49 N370 X-2.125 Y-2. N380 G80 N390 M05 N400 G91 G28 Z0. N410 G90 G53 X0. Y0. N420 G90 N430 M30

thank you very much JParis:)

Hi all:) Could anyone point me in the direction as to how to add canned text like special coolant cycles and stuff. any help appreciated! cheers

It worked gr8 jp thank you:)

Thanks again

I cant seem to find force toolchange in this post:(