We use prodrill as it is very flexible and very affordible!

ok thanks:)

Good morning everyone, I was just wondering if anyone knew when x9 hle will be coming out. thanks:)

with the one above I did no edits just wrote it in like this and i know its wrong but atleast you can see it 7. "Thru Coolant - M07" 50. "Bottom Wash- M50" 8."Flood Coolant- M08" 9."Coolant Off- M09"

I seemed to have got it with just this,dunno how lol [canned text] 1. "Stop - M00" 2. "Op Stop - M01" 3. "Bld on" 4. "Bld off" 5. "Dwell - G04 P1" 7. "Thru Coolant - M07" 50. "Bottom Wash- M50" 8."Flood Coolant- M08" 9."Coolant Off- M09"

Doesnt seem to work if I add if cantext$ =12, [ pbld, n$, "M07", e$ it comes out like this N250 M07 N260 M12

MP v11.0

I am not sure exactly what you are getting at.

N120 M50 N130 M11 any help appreciated

Ok I have added these 3 codes but my program adds the mcode m50 and m11 and m07 and m12 and m08 and m13 See program example below. if cantext$ =11, [ pbld, n$, "M50", e$ ] if cantext$ =12, [ pbld, n$, "M07", e$ ] if cantext$ =13, [ pbld, n$, "M08", e$ ] 1. "Stop - M00" 2. "Op Stop - M01" 3. "Bld on" 4. "Bld off" 5. "Dwell - G04 P1" 6. "Chip Conveyor On" 7. "Chip Conveyor Off" 8. 9. "" 10. "" 11. "Bottom Wash - M50" 12. "Thru Coolant - M07" 13. "Flood Coolant - M08" O0001 (FBM TEST) (KITAMURA2) (MACHINE GROUP-1) (MCX FILE - \\JPBFS01\COMPANY\COMMONAREA\MIKE STAPLETON\FBM TEST.MCX-7) (DATE - APR-02-2015) (TIME - 9:23 AM) (T7 - 10. SPOT DRILL - H0 - D0 - D0.3937") N100 G00 G17 G20 G40 G80 G90 N110 G91 G28 Z0. N120 M50 N130 M11 N140 G90 G53 X0. Y0. N150 T7 M06 (10. SPOT DRILL) N160 (MAX - Z1.) N170 (MIN - Z-.128) N180 G00 G17 G54 X-7.375 Y-1.5 S329 M03 N190 G43 H0 Z1. N200 G94 N210 G98 G81 X-7.375 Y-1.5 Z-.128 R.1 F.49 N220 X-4.125 Y-2. N230 X-.625 Y-1. N240 G80 N250 M07 N260 M12 N270 X-6.125 Y-2. N280 G43 H0 Z1. N290 G98 G81 X-6.125 Y-2. Z-.1181 R.1 F.49 N300 X-2.875 Y-2. N310 G80 N320 M08 N330 M13 N340 X-5.375 N350 G43 H0 Z1. N360 G98 G81 X-5.375 Y-2. Z-.1009 R.1 F.49 N370 X-2.125 Y-2. N380 G80 N390 M05 N400 G91 G28 Z0. N410 G90 G53 X0. Y0. N420 G90 N430 M30

thank you very much JParis:)

Hi all:) Could anyone point me in the direction as to how to add canned text like special coolant cycles and stuff. any help appreciated! cheers

It worked gr8 jp thank you:)

Thanks again

I cant seem to find force toolchange in this post:(

Thanks JParis The problem is I am trying to use this post for a fanuc series oi and it crashes as soon as it reads g49.

Good morning everyone:) I need some help with a MyCenter-4xiF_Fanuc30iB post . I need to get rid of the g49 on line 3360.Any help greatly appreciated:) cheers, N3310 (3D S.FINISH) N3320 (TOOLPATH - FINISHPARL) N3330 (STOCK LEFT ON DRIVE SURFS = .005) N3340 (STOCK LEFT ON CHECK SURFS = .005) N3350 X-.2 Y.0798 N3360 G49 N3370 G05.1 Q1 R1 N3380 G43 H23 Z7. N3390 Z1.9595 N3400 G01 Z1.7095 N3410 X-.1965 Z1.712 N3420 X-.1709 Z1.7262 N3430 X-.1636 Z1.7302 N3440 X-.1348 Z1.7426

Does anyone know where I might get a stl of a tos varnsdorf whn3 ? cheers,

thank you.

Good morning:) I was wondering when the release of x8 hle is going to be out? cheers,

thanks djstedman it looks good in the post now:)

Thanks for your responce, Could this be the problem? if drillcyc$ <> 8 & drillcyc$ <> 7, pcan1, pbld, n$, "G80", scoolant, strcantext, e$ if drillcyc$ = 3 & use_pitch = 1, pbld, n$, "G94", e$

Good morning everyone, I need a little info about this post when I write 2 different tapping operations the second one automatically changes from g95 to g94 which screws up the feed rate. Any help is appreciated:) Here is a sample of the code. % O0000 (T) (MYCENTER-4XIF_FANUC30IB) (MACHINE GROUP-1) (MCX FILE - T) (DATE - SEP-11-2014) (TIME - 9:03 AM) (T40 - M16 -2.0 RH TAP - H40 - D40 - D0.6300") N100 G00 G17 G20 G40 G80 G90 N110 G91 G28 Z0. N120 G90 G53 X-39.05 Y-1.1419 N130 T40 M06 (M16 -2.0 RH TAP) N140 (MAX - Z15.) N150 (MIN - Z-2.1) N160 G00 G17 G54 X-1.4674 Y.4861 N170 G43 H40 Z15. N180 G95 N190 M29 S127 N200 G98 G84 X-1.4674 Y.4861 Z-1.6 R.1 F.0787 N210 G80 N220 G94 N230 X-.2338 Y-.2984 N240 Z14.5 N250 M29 S127 N260 G98 G84 X-.2338 Y-.2984 Z-2.1 R-.4 F.0787 N270 G80 N280 G94 N290 X-.4054 Y.5988 N300 M29 S127 N310 G98 G84 X-.4054 Y.5988 Z-2.1 R-.4 F.0787 N320 G80 N330 G94 N340 Z15. N350 X1.1491 Y-.4481 N360 M29 S127 N370 G98 G84 X1.1491 Y-.4481 Z-1.6 R.1 F.0787 N380 G80 N390 G94 N400 M05 N410 G91 G28 Z0. N420 G90 G53 X-39.05 Y-1.1419 N430 G90 N440 M30 %

Does anyone have any info on this machine especially the control?We are thinking of purchasing 1 but i cant seem to find much on it. thnx

thanks for the info guys:)