Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
Thank you all for reply so fast, especialy James.
Steve, thanks, but You know, that MPGeneric is encripted, so I can'n access the most imortant part of the post. My post from MP.dll V.4 is stel O.K. So far I finished roughing the arecraft part size 101 in by 72 in, 80 % 5ax process, without any problem. Of course I have to cheat Mastercam on some processes like swarf 5ax roughing generated as seperated program and linking all together later in one program, but I was looking for simplifying the post to generait good code at ones.
Thank You all, especialy of cours James.
kota
Hi everybody
question: is there any way to foce post to reset rot axes to start stege after every toolpath?
Macking copy and paste swarf 5ax toolpath as roughing in dif z levels, MP.dll is contiuing adding deltac and deltab to the process.
How can I reset axes to the stage as start of the program, ( psof ), like rotaxtyp ?
Copaing and paisting swarf 5ax swarf is locaiting toolpath at the same pos as start pos.
System:
Mastercam 9.1 mr0105, full.
Machine:
Control: Sinumeric 840D by Simmens
Post: not encrypted, becouse created for Mp.dll 4,
yeaa, good, old time ha?, well, I've edited this post as much as I culd.
O.K.
Well, I know, You do not like me, especialy James.
Yes, I am from " Big White North " - from MISSISSAUGA, but I am stel beliving in Your proffesionalizem and constructive criticizem.
Regards
kota
P.S. Yes, I am steal learning anglish.
Well, thank You fot constructive criticism
and as I said "hapy lending with at list one engin"
beta testers. It was really proffesional job You've done.
kota
Hi, from time to time I see some guys like...well, that are posting " I do not know, but..bla, bla, bla" or "I never used it, but, bla, bla, bla" or "I did not check it, but..bla, bla, bla.." Hey guys, are You a professional programmers or what? If You really know, say it, if not "do not go on front page"
"The hell is paved with good advise"
kota
Is it better?
I wish to all CNC Inc. and beta testers to fly in plane as good as the software,
and have landing at least with one engine working.
You can try with afican lines.
OR try to drive the car in rush hour in Dntn N.York with steering weel on right side.
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.