O.K. when I've updated my post for siemens from MC9 to MCX2 SP1 everythink was O.K. Codes were perfecto!!!, but from the same MC9 post to MASTERCAM X2, MR2, SP1 I do not have any tool change code in my program!!! WTF!!! I activatied bug2 switch in post and codes are TOTALLY different, no ptlchg$ at all?? any ideas??

do not be naive, every think is set to contact Your deealer, so!!

Gunther, thank You for respond. X+ is realy great and I am using it avery day. I do not know why CNC is not recomended to run X+ on X2 MR2? I do not have eny prob. so far with MR2 (exept my quastion about fire wall) Regards I am sorry if You feel tuchet

I used this chook a loooong time and never had a problem (becouse I did not know) , but from since two weeks I sweetched to MR2 and I activated my fire wall, every time I try to run this setup sheet - chook is sending somthink outside. I repeted this with MR1 and the same send reaction from fire waal. Are They SPYING

create new tool, but the same dia and number. when posting answer yes for tool change.

Hi Jeremy Bicicle is not the Porshe 911 "Carrera", BUT do I have to buy it if I wonna go just for lunch 500 meters from my place?

what hmmmmmmmmmmmmmmm? one min fourthy eight sec was not jock !!!!!

hee, hee, hee this is my lecherous laugh

I can not get ftp but check Your top of the stock; must be 0, absolute or inc, well.., Your edge Z depth for chamfer, and specify chamfer kota

11:45 xp pro 2 gig ram P4 3.2 n_vidia quadro fx 540 BUT......, wat about 1:48, YES, ONE MIN FOURTHY EIGHT SEC my friend transfered solid model as parasolid to SOLIDWORKS and run SOLIDCAM, and created same HS toolpaths; same step, same paramerters, saved it and rebooted. changed tollerance and regen. ONE MIN FOURTHY EIGHT SEC!!!! kota

OOPs, I've forgot disable #clearsub and #clearaux as well kota

Just add this lines to Your post sextsub .SPF sextaux .SPF and disable this comands puting # key in peof: #mergesub #mergeaux For sextsub and sextaux give the extention that is accepted by Your control. I hope it is wat You are looking for. kota

O.K. I am sorry, I apologies, especially for Kannon. Yesterday was my relly bad day. Terribly tired (four new projects on the desk and THAT X2 not responding as I like in MC9) now I am goig to usay barking under the table. kota cheers

Troy, You are right and I have to thank You veri, veri much for Your NORMAL respond. I am using X2 every day ( because I have to )and belive me that I understand big job done by CNC Inc., BUT, what is I do not understad is why we are igored by dem, I meen old users and maintenance customers. Redifining old functions or hiding them in new release is not good practice. Just let me show You veri simle sample: 1. draw multi line like 20 segments. 2. now try to change color 10 segments using chain partial. 3. there is not change entity color in menu (yes I know right mouse click) but is not as a menu item 4. O.K. You click righ mouse on color palete and set chain from the bar AND WHERE IS PARTIAL CHAIN? kota

I tald You, agricultural machines is Your destination, bud kota

Hey,guys. I know, You are young, I am 51. I am using MC form V 5.6 Now, how can I take new V X2 if the functions are not the same, are not located in the same menu, are not working as previewsly, toolpaths are not corrrect, (pocket, 5 axis, WCS problem) Tallme ??

kannon, what are You traing to shaw?? weekeness of MCX2?? I am sorry buddy, this is not that leage what You are plying. Go to Your agricultural machines and do not bother any more, sorry to be soo strait. kota

OOYea, and send him to IRAQ. no voice, no PROBLEMA. Mastercam IS NOT RELEASE YET AS PEROMISED. FYALL kota

Yeaa, I know, I know. You know that I am not English born mother; but I am taking about Your prophesionalizem? Go to Europe and You can see what I am thaking about. I have a of lot drawings from BOEING !! and this is a BSH. Why ?? You'll never know. kota

Gcode, Johnparis. Hey Guys, i am not constructive poster!!!! I am critic poster. I am expecting good product; just good produckt from beta testers!!! Are You wannna tell me any thing about first release MCX!!! That could be vevy interresting, HAaa? kota

Well, to John Paris. You are absolutlly right, I am old stile, I am 51. but,,, who is gonna shaw me? ; tell me?,,, what is better in pocket milling?, how I can arrange my WCS's? ( try to set origin from snap? ), and soo on.... Thank You very much BETA T. any way. kota

Well, Yeaa, I Can not reply to last post Becous CENZOR cut me off . O.K. gcode- one question? do Youu have MR1??? We do not have it yet. Everysing I expecked from CNC is just to be honest. How can I program my 130 mb files, if I do not have yet fixed 5 axis toolpath? What about pocket remachining? Try to change collor etieties, chaine, constractiuon,plaine, and wath????? in VMC9 thath was not Qutn. Happy landing any way God Blassyou I am out

Yea, Yea Colin Beta testers + CNC ignorance = What we've got now= nothing yet. December 2006, End of the week march 2007, bla, bla, bla. BLA, BLAAA. Thank You B-T kota

James, +1 I have mill reference manual MC7 right now i my hand and that is IT, Every click, every menu is there, no question; by the way - do not You think there is too many questions on this forum?

Hey John, JUST TRY IT!!. You know nothing, do not be unprofessional; anyway, hapy lending everybody with X, X1, X2, XXX kota