Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
O.K. when I've updated my post for siemens from MC9 to MCX2 SP1 everythink was O.K. Codes were perfecto!!!, but from the same MC9 post to MASTERCAM X2, MR2, SP1
I do not have any tool change code in my program!!!
WTF!!!
I activatied bug2 switch in post and codes are TOTALLY different, no ptlchg$ at all??
any ideas??
Gunther, thank You for respond.
X+ is realy great and I am using it avery day.
I do not know why CNC is not recomended to run
X+ on X2 MR2? I do not have eny prob. so far
with MR2 (exept my quastion about fire wall)
Regards
I am sorry if You feel tuchet
I used this chook a loooong time and never had a problem (becouse I did not know) , but from since two weeks I sweetched to MR2 and I activated my fire wall, every time I try to run this setup sheet - chook is sending somthink outside.
I repeted this with MR1 and the same send reaction from fire waal.
Are They SPYING
11:45
xp pro
2 gig ram
P4 3.2
n_vidia quadro fx 540
BUT......, wat about 1:48, YES, ONE MIN FOURTHY EIGHT SEC
my friend transfered solid model as parasolid to SOLIDWORKS and run SOLIDCAM,
and created same HS toolpaths;
same step, same paramerters, saved it and rebooted.
changed tollerance and regen.
ONE MIN FOURTHY EIGHT SEC!!!!
kota
Just add this lines to Your post
sextsub .SPF
sextaux .SPF
and disable this comands puting # key in peof:
#mergesub
#mergeaux
For sextsub and sextaux give the extention that is accepted by Your control.
I hope it is wat You are looking for.
kota
O.K. I am sorry, I apologies, especially for Kannon. Yesterday was my relly bad day.
Terribly tired (four new projects on the desk
and THAT X2 not responding as I like in MC9)
now I am goig to usay barking under the table.
kota
cheers
Troy, You are right and I have to thank You veri, veri much for Your NORMAL respond.
I am using X2 every day ( because I have to )and belive me that I understand big job done by CNC Inc., BUT, what is I do not understad is why we are igored by dem, I meen old users and
maintenance customers. Redifining old functions or hiding them in new release is not good practice.
Just let me show You veri simle sample:
1. draw multi line like 20 segments.
2. now try to change color 10 segments using chain partial.
3. there is not change entity color in menu (yes I know right mouse click) but is not as a menu item
4. O.K. You click righ mouse on color palete and set chain from the bar
AND WHERE IS PARTIAL CHAIN?
kota
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.