Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Josh @ Pegasus NorthWest

Verified Members
 View Profile  See their activity

  • Posts

    34

  • Joined

  • Last visited

    Never

 Content Type 

Everything posted by Josh @ Pegasus NorthWest

  1. Josh @ Pegasus NorthWest
    Windows 7 Business and Windows 7 Ultimate can run a Virtual Windows XP computer. Tho this solution will not work for us. Virtual Windows XP works decently tho it has network issues and driver issues that make some software hard to use, but it takes up a lot of resources that I dont have to spare all the time. You can download the files from microsofts website. Its great for an ocaisonal use, but my GM has at least one MC open at almost ALL times.
  2. Josh @ Pegasus NorthWest
    Damn.. Is there a V9 Demo somewhere> I have been looking but cannot find one..
  3. Josh @ Pegasus NorthWest
    Ok, so I cant get the Hasp drivers to work for 9 in Windows 7 x64. Any advice?
  4. Josh @ Pegasus NorthWest
    Some of the GE3 files cnat open in V9. Will V9 run in windows 7 x64? The other problem is my GM used V6.13 when he was a programmer and I can't get him to take the time to learn X3! But V9 is pretty much the same as V6.13 right?
  5. Josh @ Pegasus NorthWest
    So, I know you guys probably dont use V6, but we still have and receive some V6.13 files. I was able to get it functioning on Vista X64 but on Windows 7 when I try to open a file it just closes! Any thoughts...?
  6. Josh @ Pegasus NorthWest
    So here is the story, I keep all my operations and tools on a server and point all my users to the drive. Everyone has it mapped as their M drive. I recently moved all my operations and tools, ect to a new server. Everyone still has it mapped as the same M drive but now when you try to open a file the load time is as long as 75 90 seconds or more. Sometimes saves are slow too but mostly its the loading. Any thoughts as to why this would be? I thought maybe mastercam was looking for the old server, but everything in Mastercam points to "M" so I am lost. JMB
  7. Josh @ Pegasus NorthWest
    Design LT does not open X3 files tho... Unless there is a new version of it I am unaware of..?? I need a file viewer for X3 files and was told the demo would work and could be found on our X3 disc set but this is not the case...
  8. Josh @ Pegasus NorthWest
    So two weird problem I am noticing with X3 MU1. When I drag rotate parts, (sometimes) it tweaks the geometry causing it to not chain. And with XForm Translate when I set it to "Move" it is moving the psrts but copy a few random lines. I checked and its not dupliucates so I am not sure what is causing these issues.. Anyone else noticed it? Thanks, J
  9. Josh @ Pegasus NorthWest
    power keys seem to mess up my regular key functions such as (M) for move and (T) for translate so I find myself never using them..
  10. Josh @ Pegasus NorthWest
    I know... I just want to compare my new machine...
  11. Josh @ Pegasus NorthWest
    I really want to run this on my new machine. I bet I would have a great time, UGH.. We need a benchmark for users who dont have the licensing to run this... lol
  12. Josh @ Pegasus NorthWest
    FINALLY, Logitech has the reciever in stock again! I just ordered one up and it should be her by the end of the week. YaY for Logitech
  13. Josh @ Pegasus NorthWest
    I like the Inteli point drivers because I use the buttons on my mouse for (enter) and such. But either way this mouse wont work. The problem seems to not be limited to Mastercam from what Im reading online..
  14. Josh @ Pegasus NorthWest
    LOL, anyone had any luck finding recievers for the logitech MV revo? Their site always says out of stock... I NEED ONE!
  15. Josh @ Pegasus NorthWest
    windows xp or vista? I have all the lkatest updates and it still doesnt work!
  16. Josh @ Pegasus NorthWest
    Even if I uninstall the drivers it still doesnt work. Its driving me crazy. I wish I could get a reciever for my logitech..
  17. Josh @ Pegasus NorthWest
    i had my mx revolution working in all mastercams. It worked great. I havent touched a vx nano tho...
  18. Josh @ Pegasus NorthWest
    All I have are two different Microsoft mice, they both do it. I broke my receiver for my revolution MX... I miss that mouse.. JMB
  19. Josh @ Pegasus NorthWest
    I am using Vista x32, its in my subject line and signature, but did not have the problem with XP SP3... Anybody found a workaround for this...?
  20. Josh @ Pegasus NorthWest
    Hey- No matter if I scroll forward or backwards mastercam zooms out. I tried removing intelipoint and using the default windows driver and still it didnt work.. Any thoughts? THANKS!!
  21. Josh @ Pegasus NorthWest
    Definately. I wont be using x64 even tho I would love to, as we still use some 8 or 16 bit (whichever)and x64 wont run it. I hear Vista and X3 work great. I more concerned about how functional 6.13a and V9.1 sp2 will be..
  22. Josh @ Pegasus NorthWest
    So nothing on Vista VS. XP? Unfortunately when I get my new system I wont be able to benchmark it as we lack the features required to run that file... Im sure it will be good tho considering that is supposed to be like the best CPU on the market..
  23. Josh @ Pegasus NorthWest
    Well I just ordered the best core i7 chip. I am quite interested to see how it handels mastercam. Are there any major reasons to avoid Windows Vista and any of the mastercams in my signature? We rarely use anything other than X3 I just need the ohters to be functional...
  24. Josh @ Pegasus NorthWest
    Yeah, Ive read a lot of reviews. I was wondering how everyone thought it would work for MasterCam. Has anyone used a core i7 for mastercam yet?
  25. Josh @ Pegasus NorthWest
    Not to sound like a NOOB here, but how do I run this benchmark? I want to run it as soon as I set up my new rig this week. JMB

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Useful Links

Contact Info

Subscribe to eMastercam News

 

Legal

Privacy Policy

Store Terms & Conditions

Forum Guidelines

Follow us

×
×
  • Create New...