5 minutes ago, Colin Gilchrist said:

Did you search through the header for other "tool table" options? (Possible it has a different switch name?)

Look for: 'tooltable$' (I think that is the spelling). When set to "1" or "3", we call the pre-read loop. 

(Calls 'pwrtt$', and allows you to filter on 'null' tool changes, by checking if 't$' is greater than 0. (MP signs t$ negative during pwrtt$ processing, if a tool number repeats.))

If I'm speaking what sounds like greek to you, then I would suggest starting with a fresh MPMaster, and just modifying that for your needs.

There is also the Tech Exchange, where you can download a copy of the updated Okuma 4X Posts. Any of the "OEM" Genos or MB Posts should have a ton of updates, including CALLOO88, either "Hi‐Cut Pro" or "SuperNURBS" support.

Thanks for responding Colin,

I downloaded the post off of the Tech Exchange, it works fine i'm just trying to figure out how to add the tool info.

Your first suggestion doesnt show up in my post but thank you for your help.

Generic Okuma 4X Mill.mcam-content

Hello!

I am currently using Generic Okuma 4x Mill and it does not have the tool_info. I was wondering if i could get some help in adding it into my post processor. Attached is a screen shot from MPFAN.

Any help would be appreciated.

Thank you

Hi everyone,

can someone tell me how modify mpmaster post?

My comment is "FINISH PROFILE CONTOUR" and it shows up in N15 but i want to show up in N25 right next to the FLAT ENDMILL.

I would like it to look like: T1 M06 (1/2 FLAT ENDMILL FINISH PROFILE CONTOUR)

any help is appreciated.

could somebody explain to me  how misc values work? I have a trouble with this issue ,it make crazy motion in my router 5 axis. In the picture attached i put a red box around the value that i need to modify but i don't know how to do it.

 i appreacte any help.

hi guys,

I need to know if there is a way for the rotation on the 4th axis to be CW ,but for the G code to still be positive?.I have attachedthe program along with pic.I;m using a generic haas 4 axis vnc.

thx

TEST 4 AXIS.MCX-7

Ok Crazy^Millman, I will.thanks

Hi Crazy^Millman

Ive tried to use it but theres alot of lines that need to be chnaged and alot of codes that the machine doesnt recognize, basically it would be alot of editing manually. Thats why i looked for someone who can show me how to modify it.

Hello everyone,

Today i updated my fadal post processor (version 9.1 to x6), for some reason the lines in the picture showed, are all on one line on the x6 version, but on the 9.1 version they are on two lines. If i run the machine on the x6 version it will crash. My question is if someone can help turn the one line into two lines like the 9.1 version on my post processor.

Any help is appreciated.

hi guys,

Could someone tell me if its possible to rotate my 4-axis (thats on the x axis) to the y-axis if so, is it A or B-axis, do i need to change something in my post or my settings (i am using MILL DEFAULT post)

Thanks in advance.

thx kccadcam,

it has been fixed.

I dont think so,check the front view and run backplot you will see the shape.

yeah but I dont Know why in the part look like egg.

hi guys,..

could one of you please do this program please,Idid it but the holes(0.394") come out an egg shape.

thx guys.

TUBING PART-4 [email protected]

Hello I am working on getting the generic bridgeport post to work properly with a Bridgeport Torqcut 30 for mastercam X5...

THX.

Hi everyone,

Does anyne know how to modify a post processor to control fanuc 10T , which where the X is negitive .

Thank you

I think you could certainly start with one, I would likely pick the

 

MULTI - AXIS MILL / TURN LATHE 2 - 2

 

To get started but I think there will be ALOT of editing to be done.

Wow mmm.....,Ok JParis thx a lot for your help.

I am guessing you'd best contact your reseller, you're almost certainly purchasing a post for that machine.

Oh Ok, what do u think about a generic post processor?

Reseller should be able to get you going.

 

What are the machines capabilites?

 

Multi turret and multi-spindle machine generics are available as part of the install.

Description: WT 100

Multi-tasking compact machine featuring state of the art capabilitise

* Up to 22/15kW cutting power available for turning shaft-work with synchronized spindles.(Motor power 11/7.5kW per spindle)

* Driven-Tool Motor Power 7.1/2.2kW,for heavy cutting with small tools.

* With upper / lower turret construction,4-axis machining as well as various other machining combinations possible on either spindle

* With upper / lower turrets and opposed two-spindle construction,cycle time balancing and reduction is possible.

* With up to 24-tools per turret,48 tools can be permanently available.

regards

MC

Hi Guys,

We have a machine Nakamura -Tome wt 100,But I don't know what kind of post processor I should use for it?

thnx.

DOH!!!

 

in the transform, change it to maintain source operations

Thanks a lot JParis,for your help,.....it's working fine......

Look at my work offsets, post it.

 

Then check my settings in the transform, its set to off

every is just fine but the issue or question i have is? how come when i post it to G codes ready to put it into the machine, all my work offsets are different according to the angle for example:

N1020 T9 M6

N1030 G0 G90 G54 X-2.25 Y0. A0. S4500 M3

N1040 G43 H9 Z.73

N1050 G99 G81 Z.2375 R.73 F30.

N1060 G80

N1070 G55 X-2.25 Y0. Z.73 A-90.

N1080 G99 G81 Z.2375 R.73 F30.

N1090 G80

N1100 G56 X-2.25 Y0. Z.73 A-180.

N1110 G99 G81 Z.2375 R.73 F30.

N1120 G80

N1130 G54 X-2.25 Y0. Z.73 A-270.

N1140 G99 G81 Z.2375 R.73 F30.

N1150 G80

N1160 M5

N1170 G91 G28 Z0.

N1180 A0.

N1190 M01

I don't like your part setup for 1 reason I ALWAYS suggest if you do rotational work, set it up on the actual system axis it will be rotating about.

 

In this case this works, set all ops to 0 on the work origin, the rotate around the top

Oh OK thanks,but how can to get just G54 ( No G55 G56 57.....) and 0-90-180-270 deg.

thx.

I'm using GENERIC HAAS 4 -AXIS VMC.

THX.

Hi Guys,

I'm trying to make a program in a 4 axis but I don't now how, I wanna to use just one WCS (G54) and to get 0-90-180-270 deg ,is it possible?

thx.

SAMPLE PART.MCX-5

Hi guys,

I'm looking for a sample file how can I use High feed.

thanks a lot guys.