-
Posts
243 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Posts posted by GIZMO 21
-
-
Go into the harvey website.under the threadmill section theres some really good info
About feeds and speeds, depth of cuts for different materials,even a formula to figure out
Radial feedrate.good info. Just to check out. i recommend it.
- 1
-
Aqui vas encontrar ayuda donde te lo puedan explicar mejor en español.
Emastercam es el mejor foro para mastercam. Pero la mayoria de los miembros
De aqui hablan ingles.
-
20 years doing this, and didn't think to check with a thread gage.
sorry man had to say it.
- 6
-
mastercam will do just fine, but it takes someone to know how to do it.
you'll be fine with some training. we had few guys here bashing mastercam
telling the owner that it can't do this and it can't do that, so the owner asked for
my opinion, and I told him the only thing these guys need, is some training.
after they went to training, VOILA. now all of a sudden mastercam does do all those things.
- 2
-
your x6 image matches the way the interface looked when x7 first came out.
after the x7 updates came out the interface changed.
-
oops. never mind
-
-
honey bunches no disrespect, but you might not have enough work because you're being outmachined
by companies with modern equipment.
is that how the guy from barefoot cnc said it?
like I said no disrespect.
-
I don't care i'll say it again.
"I find it hilarious when we get a new member on this forum, and their very first post is asking for a post for their machine."
-
I find it hilarious when we get a new member on this forum, and their very first post is asking for a post for their machine.
-
been programming using mastercam for about 10 years, and about 2 years ago I opened a level 1
book just to check it out ,and picked up a few things. always learning something new
- 4
-
also make sure your normals are set correct. not saying this will fix your problem just a suggestion.
-
damn it does s*&k.
-
the key thing here is to make sure to tell them about the models before you sign anything. cause if you tell them after
the sale is over, well their gonna want more money from you.
-
them guys at shopware are good. im curious what happens if you try to verify half of your ops.
just to see if it loads completely, then try to verify the second half ,and again just to see if it loads
the whole thing. just trying to pin point the problem
-
click on the ecourses tab at the top of this page, go into whatever level you wanna look at then click on the learn more tab.
- 2
-
WHAT!!!!.I always thought it was roman numeral x for version 10, but then they forgot mastercam x1.
-
I think I got it. check this out though
- 1
-
it tells me its too large too load.
-
how do you guys load these files?
-
I know this su#@, but I use a manual entry with unlock codes before the 5 axis operation
and a manual operation with the lock codes after the operation, because if you manually
unlock the rotaries you have to manually lock them or else they wont lock.
- 1
-
I think his is set to black too, you're probably seeing the stock in red.
-
As for what Daht siad, it is kind of true. well lets say most do not come to me for my writing. LOL
No worries jay, i understand your spelling
-
You're right about that, but when you ask for help with a post issue it's a little bit more involved.Like i posted before we are using genuine version of mastercam and I known I can contact shopware with any problem i have but if every mastercam user call a dealers with all problems nobody have to post here and nobady can lern
from it.
Thanks
Someone would have to take a look at your post and pinpoint the problem, and you are in the right place for
Help , and to learn mastercam.
Mirroring 5 axis Toolpaths
in Industrial Forum
Posted
sounds dangerous. good luck with that.