Go one page back in this forum (page 2) and read "help on machine simulation" , there you will find a file you can down load that has the "A" on the right side, and instructions on how to mirrror the stl of the chuck for the A. Hope this helps, it helped me out.

Any one out there help me out with some parameters for the same kind of problem on a 2001 (year) Jonford DMC 1200 with a yasnak pcnc controller and golden sun rotaries.? Sorry for the duplicate!

Any one out there help me out with some parameters for the same kind of problem on a 2001 (year) Jonford DMC 1200 with a yasnak pcnc controller and golden sun rotaries.?

Thursday I got stumped on a simple drill path, I was using a named plane as my consruction plane and checking rotary indexing, x axis on rotation. When i would backplot the plane orientation would be off . After double checking everything, reading the help section etc., I called the Fastech guys and was fixed up in no time. Turns out there may be a bug, when i turned off rotary indexing everything worked fine. I was told that the rotation was being pickup off of the construction plane I had set. No need to define the rotary. Strange thing is that i had set rotary indexing on earlier for a contour tool path and it worked fine. Any one else seeing this???