Columbo How do you like Vantage? We are considering switching to it.

C&R Racing Inc., an Indianapolis IN based manufacturer of auto racing components, has an opening for the following position. We offer competitive pay, medical and dental insurance, and 401k. CNC Programmer/ 2nd shift Supervisor. 10- hours/ day 4 days/week ·Must have strong “hands on” background in a modern CNC machine shop. ·Must be knowledgeable and proficient in CNC mill and lathe set up and operation. ·CNC programming using Mastercam X, create set ups and fixtures and be able to read and decipher sketches and drawings. ·Must be competent in first article inspection. ·Mitutoyo CMM experience a plus. ·5 years minimum experience Visit our web site @ www.crracing.com E-mail resumes to [email protected]

C&R Racing Inc., an Indianapolis IN based manufacturer of auto racing components, has an opening for the following position. We offer competitive pay, medical and dental insurance, and 401k. CNC Machinist / Supervisor 2nd shift. 10- hours/ day 4 days/week ·Must have strong “hands on” background in a modern CNC machine shop. ·Must be capable of managing people and the shop. ·Must be experienced and capable in CNC mill and lathe set up. ·CNC programming using Mastercam, create set ups and fixtures and be able to read and decipher sketches and drawings. ·Must be capable and experienced in first article inspection. ·Mitutoyo CMM experience a plus. Visit our web site @ www.crracing.com E-mail resumes to [email protected]

Meldas 500L control.

We are in need of a good programmer/operator for Mazak Nexus 200ms and Daewoo turning centers. Minimum 5 years experience.We are located in Indianapolis IN and manufacture parts for the racing industry. Our shop is clean and climate controled. We offer competeitve pay, health care and 401k. We have 3 seats of MasterCam. Email resume to [email protected] website www.crracing.com

Is there a good post off of the CD for a Daewoo Puma 8s with a Mits control? Any help would be appreciated. Thanks

I have to machine a lot of magnesium, and I am looking for some advice on cutting fluid. I will cutting it in a Haas VF3. I am concerned about using water based cutting fluid. Any ideas? Thanks

I'v been in Indy for ten years. I lived in Whittier until I was around 7 or 8 then we moved to Hacienda Heights. My grandmother just moved out of Whittier a few months ago after 60 some years, and I still have freinds that live there. Small world !

Thanks Hardmill I'll give that a shot in the morning. I never noticed you are from La Habra. I lived in and aroung Whittier until I was 25, then I moved to Indy

We have X running on two machines, one works fine the other crashes all the time in backplot. The one that works is a Dell Precision 3700 p4 with 1 gig ram, Nvidia Quadro FX1300 video card with 128mb. The one that crashes is a Dell insperion 9300 laptop with a Pent M 1.65ghz with 768meg of ram. It has and Nvidia G-Force 6800 card with 256mb. Both running XP service pack 2. Any ideas? A file that runs fine in the 3700 will crash in the 9300. So it is not a file issue. At this point I am hoping that the new service pack for X will fix it. I'm not sure it will. Thanks in advance.

A few easy questions for you experts. 1.How do you get my tool #'s to default to use sequential #'s? 2. How do you import your tool library from V9? I have followed the directions in the transition guide, but I still don't have it correct. 3. How do you get the nci file name to defualt to the program file name? This used to happen automatically in V9.All I get now is the machine group for an nci file name.Somtimes I do 10 or 15 programs a day and it gets a little old. That's all for now thanks.

How do I get any x-form operation to defult to move instead of copy? Thanks

Posting dialog does appear, defualt set to mastercam editor. If I hit ok on the activeX window the editor comes up but does not diplay my program. I can open the NC file with the editor and it appears to be correct.

When I try to post I get a message that says the ActiveX component cannot create object. It does this on any post I use. It only happens on one of my computers. I tried rebooting and reloading X yesterday, that worked but today it's back to the same old thing. My IT guy and Mastercam dealer can't figure it out either. Thanks

www.matweb.com