rookie1,

Welcome to the forum.

If you don't like the default size of the header,you could just make your own. Use the size font that suits your purpose.

Rob

+1

The CD is very helpful. It won't teach you how to write posts, but it will explain how to edit them.

I was gonna print mine out, but I think it ends up being about 1,600 pages.

Rob

If there is I sure would like to know what it is also...

I also have the same problem. Had a few close calls in the past by assuming the right tool was in there. I woke up pretty quick.

Rob

Gotta be "R"

Rob

Paul,

Sorry to hear about your injuries. Hope you heal quick & well.

Looking forward to seeing some pictures.

Hey, Elton John?!?! What were they thinking?

Rob

Hi Murlin,

+1

This place is great!!

Humble Pie--They rocked in their time...

Rob

Snap,

Try these,

http://carrlane.com/

http://www.vektek.com/

Rob

Man, two years already. It doesn't seem so long ago. The memory of all those people being killed and the towers falling will be with me forever. .

We could only look to the future, but never forget the past.

Rob

The problem that we encounterd here was that we had to hold +.0003/-.0000 (in) tolerance with an end mill. That is no problem on paper. Again with inch mode there was only .0003 to play with ( hard to split that up)... The machine holds the tolerance very well, but running it in metric mode gave us the flexibility to really tune it in just right. It has been working out very well for the past couple of years with no mistakes (knock on wood).

Rob

That was my doing. Once again my apologies to everyone for jumping the gun, especially S4A.

Thank you Bullines for removing the thread and saving my a$$.

Rob

I hope they're better than the cars.

Seriously, I have no clue... Sorry

Rob

Tintivilo,

Welcome to the forum.

V5., wow it's been years since I have even used version 5. Not sure if I could be of any help here. Your boss should think about upgrading.

When you say the prompt tells you to ignore or quit-- Is it a mastercam prompt or windows?

What do you mean by "getting a framing error"?

Please be mor specific.

Rob

Don't know... Right now I work with both, inch & metric. Metric system is much easier to understand especially if converting to inches is not an issue. One big draw back is that most of the tooling I own is inch so I still have to use my calculator and figure out where I am (operator intervention-just another way for a mistake to happen). One big advantage for using metric system is the machine tolerances; If the machine is set to metric, the tolerancing improves (.0001mm vs .0001in)

Rob

Do you have the latest patches? Are you sure everything is configured correctly? Are you using .SET setting in the configuration settings?-- What version of MC are you using?

If you're on 9.1 you also have to change this path to sdirpath "C:Mcam91MillSetup".

Mine works correctly even though I never use it.

Rob

To be more exact first you have to drill all your points. Than backplot them. In backplot save your toolpath as geometry ( I prefer different level). Than chain you rapid toolpath (make sure in options you check plane mask). You're all set.

Rob

Yes, you can do it.

In backplot save your toolpath as geometry than chain it.

Rob

[ 09-04-2003, 10:21 AM: Message edited by: robk ]

Glad to hear Guhring worked for you... They really are excellent drills especially with the firex coating. I'm in the process of switching over to Guhring from Mitsubishi, not because the Mits. drills are inferior in any way but the size range from Guhring is really an advantage especially for its lengths.

Rob

This kind of reminds me of the Moldbase option Mastercam used to offer up to Version 6 I believe. There was no surface or solid options with it at the time, but the idea was the same... It looks like it would simplify repetative tasks quite a bit.

Rob

cmr,

I would not recommend putting your operation library on the network (it slows it down very much)...

FYI- Make sure if you make any edits to your operation library that you compress it to save the changes.

Rob

machinetec,

Make sure your tool offset register in job set-up is from tool.

Rob

And for when the season is over I've got my NASCAR Thunder ready for Xboxto get me through the off-sesaon.

Rob

Sorry May^Day for repeating you...

Rob

.008 press?!?!--- Man are those bearings gonna spin?

Why the .0002 tolerance?

Rob

When you create a new tool..In the tool paramaters page. It asks for length offset #.

Rob

+1 May^day

good explanation

Yes... Your H# is your TLO#. Put in the length of the tool into your corresponding offset #. That way the machine knows where the tool is in relation to where the part is.

Rob